Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Two sprung clamps for holding work piece. 45°, 22.5° and 90° guides.
45°, 22.5° and 90° guides on the two edges with a side on 45° for larger sections of materials.
Two bench edge stops and 2 countersunk slots for permanent fixing to bench.

Technical Specification
Brand Draper Expert
Manufacture ID 9789
Video click here
Delivery details

Due to temporary service restrictions our estimated delivery time is currently 2-3 business days. Due to current trading conditions we have also suspended our Turbo and Saturday delivery services until further notice. Deliveries direct from our suppliers are currently unaffected.

Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details

Click & Collect

Due to the Government’s Social Distancing guidelines and to protect the safety of our people, our customers and the communities we serve, we are unable to operate our branches as they were, so we have launched a new Click & Collect service for essential services. For further information on how this service works please click here.

Call & Collect

Due to current trading conditions we have suspended our Call & Collect service until further notice.

If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Draper Expert Clamping Mitre Box 367 x 122 x 70mm is rated 2.4 out of 5 by 11.
Rated 1 out of 5 by from Too floppy for a mitre box I took this back the day after I bought it, without even disturbing the packaging. It is rather flexible, to the point that the angles you are cutting would be affected due to flex during to sawing. I also didn't like the clamps - really flimsy and more fiddly to operate as some other clamping mitre box designs I've used. I wouldn't recommend, but I'd ask Draper to consider increasing the thickness / stiffness of the body and invest in metal clamps. Then, despite a more expensive product, at least I'd only need to buy one once.
Date published: 2020-03-23
Rated 1 out of 5 by from Disappointed Clamps failed after 2nd use
Date published: 2020-01-12
Rated 2 out of 5 by from Ok for a few cuts I bought this 3 days ago to do some corners on skirting boards. With every cut the saw takes slivers off of the plastic guides, causing the angles to wear. Ihave fone11 cuts and it’s about ready for the bin.
Date published: 2019-12-04
Rated 1 out of 5 by from Waste of money Impossible to make a decent 45 degree mitre cut. The plastic wears out after 2 cuts
Date published: 2019-07-31
Rated 1 out of 5 by from Too Flimsy I used this to try and cut skirting boards and the plastic clamps just snapped off.
Date published: 2019-05-09
Rated 5 out of 5 by from One of the better ones Now much used, once I found out how to work the slide. I also found Toolstation, the cheapest for this product; can't be bad
Date published: 2017-10-14
Rated 1 out of 5 by from not one I brought a week ago and fount when held with lower mounting the unit twist out of shape when cutting wood ,the wood holding clamps twist the side out of line so you do not get the angle you are looking for A TOTAL LOAD OF Rubbish
Date published: 2017-06-25
Rated 4 out of 5 by from Very Useful Found this a good tool. Bit stiff to adjust but allows accurate cuts and is easily fixed to work bench.
Date published: 2017-02-16
  • y_2020, m_4, d_7, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_10
  • loc_en_GB, sid_20991, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 59ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.