Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

A hidden galvanised fixing for quick and easy installation of timber deck boards to joists. Screw or nail the clip to the joist and tap the deck boards onto the spiked flanges to create a secure connection with no visible screws. Maintains a constant gap between boards.

Technical Specification
Brand Powapost
Manufacture ID DC
Type Fencing
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Decking Clip (100 Pack) is rated 2.6 out of 5 by 9.
Rated 3 out of 5 by from Hidden fixings Soft metal to be hitting, got the hang of it after third deckboard. Ideally needs a tool designed to hit home, especially knots etc. Difficult to install alone, as you fix one end the other pops out. Took longer than it would have done with screws. Already noticed some movement but time will tell. Definitely aesthetically more pleasing.
Date published: 2019-07-20
Rated 1 out of 5 by from Stick with screws Sorry but I really cannot recommend these, they seem a great idea but I struggled to get the decking level with them so I had to pull them out and fallback to screws
Date published: 2019-06-13
Rated 1 out of 5 by from Poor Each one bent - the decking was harder than the clips - will be returning.
Date published: 2018-08-28
Rated 4 out of 5 by from Decked out I bought these for my decking project, basically i didn't want many screws showing. The clips work well the tricky bit is knocking them into the boards.
Date published: 2017-07-28
Rated 1 out of 5 by from Disappointed This looked like a great alternative to screws, but turned out to be a disappointment. Spent 4 times as long getting these into one board than it would have taken to screw. I think if you're using short, straight, softwood decking boards this will work. Problem I had was using 4.8m pine boards, which weren't quite straight. Meant the clips were a nightmare to bang into the boards and very hard to align. After 1 board I gave up and screwed the rest in. Even had to go back to this board in the end and use screws to pull the board level.
Date published: 2017-06-09
Rated 4 out of 5 by from Not a bad alternative to more expensive products I never leave reviews but as there's only one i thought I'd try and help people out, basically i looked a lot of different deck fixings from camo to tigerclaw but each had limitations like depth of wood or cost of fixings. I decided to try these as i could readily get more if i ran out, basically they are great little fixing but i would recommend a board clamp and then it makes installing this product a dream. Overall a great product at an attractive price point!
Date published: 2017-05-26
Rated 4 out of 5 by from Good product, needs something to help insert it. The decking looks fine using these and is going smoothly but knocking these into the wood without bending them isn't easy. I used a block of wood with a couple of metal strips separated at just the right width to allow the spike in between and then using a hammer to hit the block to knock the clip into place. Using a metal hammer directly on the spike would ruin the clips, and using a rubber one will damage the hammer but otherwise the product is good.
Date published: 2017-05-11
Rated 4 out of 5 by from Very useful but needs some improvements Bought these clips to create a 20 squ. metre deck with virtually no visible screws. They do the trick but have some flaws; Firstly the metal is quite soft so they are easy to bend when you're hammering them in. There is a knack but I needed to bend a few to get the technique right. Applying to softwood decking boards is easy but with the inevitable warping on new boards, these clips are no good at holding the board straight (once jigged true) so the addition of diagonal deck screw down the board edge seems to do the trick. They would also be easier to use if you could either get half clips or they are perforated to allow you snap off half the base plate, as where you have a decking board running flush with a support beam you cannot apply these clips. Well unless you want to get busy with a hack saw! Overall they seem to be a good way to fix a deck without lots of unsightly screws and I would recommend them.
Date published: 2017-03-31
  • y_2020, m_2, d_17, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_8
  • loc_en_GB, sid_96758, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 15.49ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.