Torbeck Float Fill Valve 1/2" Side Inlet

Product code: 42876 Pack size: Each

£6.58 Exc. VAT £5.48
Quantity

Product Details

• Suitable for high and low pressure systems, reduces water hammer
• WRAS approved

Technical Specification
WRAS approved
Manufacturer ID B610
Delivery details
 

DELIVERY OPTIONS (UK mainland only)

Next Day Delivery – £5.00 or FREE for orders over £25

  • Order before 9pm Monday to Thursday for next business day delivery
  • Order Friday to Sunday before 6pm for Monday delivery
  • Orders placed after Sunday at 6pm will be delivered the following Tuesday
Pre-12pm Delivery – £10.00 or £5.00 for orders over £25, to arrive before 12pm on the scheduled days above

Saturday Delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 6pm Friday)

Sunday delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 4pm Saturday)

Times may vary for items being delivered directly from the supplier. For more information, please visit our delivery information page Items over 30kg can only be delivered next Business Day Mon-Fri. Orders placed after 9pm Thursday will be delivered the following Monday
More about Delivery & Returns
Click & Collect details

Collection Details

We are fully open and delighted to welcome our customers into our branches. Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

We advise that you check your local branch is open on the branch locator page, before you visit.

Once you have placed your order online, we’ll have it ready for you at the branch you have selected in as little as 5 minutes. We will hold your order for 14 days, after which we will automatically generate a refund to the payment type you used to place the order.

Please wait for your text or email before coming to collect it and be aware that we will still have health & safety measures in place, so we ask that you observe the branch guidelines.

Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Reviews
Torbeck Float Fill Valve 1/2" Side Inlet is rated 3.7 out of 5 by 54.
Rated 4 out of 5 by from Good value valve. Good value, incredibly cheeply made but does the job and was easy to fit as a replacement for a failled similar one. Was tempted to get a brass one but this one was so much less expensive. Will fur up just as quick as a dearer one so probably the sensible option.
Date published: 2021-09-29
Rated 4 out of 5 by from 25 Year Old Torbeck now working like new again. These are now made in Turkey rather than England, but I was able to repair a 25 year old older Torbeck by just changing the blue plastic nut, float arm, end cap, and diaphragm. The 25 year old diaphragm was still working so it wasn't that part that was causing the Cistern to overflow very slowly. However, the 25 year old diaphragm did need replacing as black residue was coming off it when you touched it. I reused my old float although I could have used the new one. The new float wasn't sealed but was like an upside down bucket that traps air inside the float when the water level in the Cistern rises. Only 4 stars as there's no plastic tube to refill the Cistern quietly like the old one, although as I wasn't changing the main body of this valve, I reused my old plastic tube and main body. Took about 1 minute to change as I didn't need to turn off the water as my Cistern is refilled from a cold water tank about 2 metres higher than the Cistern, ie. it's a very low pressure system. You might need to turn the water off if your Cistern is filled under pressure from the mains to replace the blue plastic nut with associated diaphragm, end cap, float arm, and float, etc. In the past, I have found that I need to rinse out the diaphragm every 10 years to stop a slow overflow situation developing. Very reliable piece of equipment, especially when filled from a very low pressure cold water tank, ie. under gravity and not mains pressure.
Date published: 2021-09-26
Rated 5 out of 5 by from Quick replacement Quick and easy to fit does the job well
Date published: 2021-09-21
Rated 3 out of 5 by from Don’t last long. Inner rubber went These are ok but only last a few years. Which can be a pain if in a concealed cistern. Have fitted a couple and decided not to use again to avoid call backs
Date published: 2021-09-01
Rated 1 out of 5 by from faulty part costed me 45 pounds the part was faulty. The air intake was blocked. I had to pay plumber 45 pounds just to realise that the part was faulty. It was 5 minutes job otherwise Is toolstation going to return me that 45 pounds?
Date published: 2021-08-20
Rated 5 out of 5 by from Does preciously what it's designed for. Easy to fit and works perfectly, but you MUST fit the float cup for it to switch off properly.
Date published: 2021-06-12
Rated 5 out of 5 by from Torbeck side entry WC float valve Does the job well and will easily fit into a large majority of toilet cisterns out there.
Date published: 2021-06-01
Rated 4 out of 5 by from Get the right size wrench!!! Easy installation by vaguely efficient female diyer. 12 minutes once I had the right size wrench! (Stanley 12 inch FatMax item 69361). Makes strange noise as valve closes for first few days but beds down to tore-assuring click. Swap new float for the old style one which is marginally narrower and less likely to hit central tank siphon. All in all good value, even with the wrench(es)
Date published: 2021-05-13
  • y_2021, m_10, d_24, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_54
  • loc_en_GB, sid_42876, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 67.65ms
  • REVIEWS, PRODUCT

You might also like

Hey, browse our site often?

ADD TO HOME SCREEN