TCT Core Drill Kit 3 Core

By Toolpak Product code: 53456 Pack size: Each

£33.34 Exc. VAT £27.78
Quantity

Product Details

Suitable for drilling holes into brick, breeze block, masonry and concrete. Can be used for impact or rotary drilling. Kit contents: 30mm, 50mm, 110mm core drills with M22 thread, 1x SDS+ and hex adaptor 110mm long, 2x 8.0 x 110mm pilot drills.

Technical Specification
Brand Toolpak
Chuck Type Hex & SDS
Manufacturer ID TCD-Sets
Delivery details
 

DELIVERY OPTIONS (UK mainland only)

Next Day Delivery – £5.00 or FREE for orders over £25

  • Order before 9pm Monday to Thursday for next business day delivery
  • Order Friday to Sunday before 6pm for Monday delivery
  • Orders placed after Sunday at 6pm will be delivered the following Tuesday
Pre-12pm Delivery – £10.00 or £5.00 for orders over £25, to arrive before 12pm on the scheduled days above

Saturday Delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 6pm Friday)

Sunday delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 4pm Saturday)

Times may vary for items being delivered directly from the supplier. For more information, please visit our delivery information page Items over 30kg can only be delivered next Business Day Mon-Fri. Orders placed after 9pm Thursday will be delivered the following Monday
More about Delivery & Returns
Click & Collect details

Collection Details

We are fully open and delighted to welcome our customers into our branches. Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

We advise that you check your local branch is open on the branch locator page, before you visit.

Once you have placed your order online, we’ll have it ready for you at the branch you have selected in as little as 5 minutes. We will hold your order for 14 days, after which we will automatically generate a refund to the payment type you used to place the order.

Please wait for your text or email before coming to collect it and be aware that we will still have health & safety measures in place, so we ask that you observe the branch guidelines.

Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Reviews
TCT Core Drill Kit 3 Core is rated 3.7 out of 5 by 55.
Rated 4 out of 5 by from Did the job Did the job .. found that the edge us off the 4" cutter and taking much longer to cut. Old type bricks seem harder than usual
Date published: 2021-07-19
Rated 2 out of 5 by from TCT Core drill kit Unfortunately this really struggles to cut through a normal concrete screed. I have a shallower but cheaper Chinese cutter that was edged with ?diamonds and this worked far better, but unfortunately I needed a deeper cut and thought this would do the job. I have not tried it through brickwork as yet. Presentation box is cheap and poor quality with locks that easily fall off.
Date published: 2021-07-10
Rated 4 out of 5 by from Great kit Core cutter great value , worked well and done the job
Date published: 2021-07-08
Rated 4 out of 5 by from Good product, case damaged Product is good, but one of the storage case securing tabs was missing, which I didn't notice until I had used the drill bits so couldn't really take it back. Otherwise it is fine
Date published: 2021-06-08
Rated 1 out of 5 by from Not very good Drill bit blunt after one use
Date published: 2021-05-20
Rated 2 out of 5 by from Not deep enough Tried to use the 110mm cutter to go through a cavity wall but it wasn't deep enough to go through the brick. You have to smash the brick out to get all the way through. I would avoid if you can't get to both sides of the brick you are trying to cut through.
Date published: 2021-05-11
Rated 5 out of 5 by from Masonry cutter These were perfect for the job quality was good and the can in a case
Date published: 2021-05-07
Rated 2 out of 5 by from Poor quality but good selection Overall poor quality. The positive is the selection of sizes offered. I used the 40mm 1st. The core was a tight fit on the thread. Pretty much impossible to unscrew now, tried in vice but failed. With the non sds bit I used the 100mm core. The box is useless with the core welded to the bit. Save some money and buy the core and drill separately.
Date published: 2021-04-27
  • y_2021, m_7, d_23, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_53
  • loc_en_GB, sid_53456, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 35.66ms
  • REVIEWS, PRODUCT

You might also like

You know the drill, we all love cookies… the ones we use on this site are for analytics, personalising your experience and helping with our advertising to show you more of what we know you’ll love. By hitting accept, you agree to our website cookies.
VIEW OUR COOKIE POLICY

Hey, browse our site often?

ADD TO HOME SCREEN