Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

For use with swivel nut connections on flexible tap tails. Ensures washer fits flat, securing seal. Fits into a standard 15mm isolating valve.

Technical Specification
Manufacture ID 1538APR
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Tap Tail Adaptors 15mm x 3/8" (2 Pack) is rated 4.6 out of 5 by 35.
Rated 5 out of 5 by from Value for money. Value for money, Job done.
Date published: 2020-01-10
Rated 5 out of 5 by from Useful for connecting flexi tap rails Perfect fit connecting flexible rap tails directly into a compression fitting , in-line Valve
Date published: 2020-01-09
Rated 5 out of 5 by from Tap tastic Having bought a new set of taps with a female braided pipe tail connection I thought that I would have to remove the old compression service valves and fit a new valve. These are the solution! Just undo the top compression nut and remove the old tap tails. Fit a fresh olive to this adaptor and drop into the service valve. Tighten the compression nut and it’s ready to receive the new pipe tails. Couple of thoughts - why not include a new olive in the pack and in my case I only needed one adaptor as I had both a male and female tail. Why not sell them in single packs as well.
Date published: 2019-12-14
Rated 5 out of 5 by from Flat face adapter for flexible tail Amazed how few stores sell these items best way to connect flexi tail with female fitting to normal pipe work
Date published: 2019-12-07
Rated 5 out of 5 by from Solved my problem Perfect for fitting Grohe tap tails to 15mm pipe straight connector or stop valve.
Date published: 2019-12-04
Rated 4 out of 5 by from Good product Did the job satisfactorily. Could have done with being a bit longer
Date published: 2019-11-26
Rated 5 out of 5 by from A Useful fitting Enables a tap connector to be fitted to an isolating valve or other compression end fitting. It provides a wide brass face for the soft seal of the tap connector. Length of the 15mm compression end 19mm. Thread length11mm
Date published: 2019-11-14
Rated 5 out of 5 by from Ideal, water tight, easy These work really well to ensure a complete seal when using rubber-washered flexi tails. They are easily fitted to any compression fitting before it is installed in place. I have used them both on isolation valves and other compression connectors. Wouldn't be without them.
Date published: 2019-11-10
  • y_2020, m_1, d_25, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_32
  • loc_en_GB, sid_63663, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 80.79ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.