Rustins Advanced Wood Preserver 5L Clear
by Rustins Product Code: 21497 21497
5 purchased in the last 24 hours
Pack size: Each
(101)
£37.87
ex. VAT £31.56
Pack size: Each
20+ Available for delivery. Please see our updated delivery times for the Easter weekend below:
Easter 2024 Opening and Delivery Times
Product Details
Protect timber structures like fences and sheds from wood rot and insect attacks with Rustins Advanced Wood Preserver. It's based on micro-emulsion nanotechnology – ultra-fine particles penetrate deep into the bare wood for a long lasting effect. Since it's water-based, it can be applied to damp or dry timber for protection both indoors and outdoors.
The preserver is simple to apply – its two coats can be applied using a brush or coarse spray to protect any smooth or rough bare wood. When used outdoors, it will be even more protected when finished with a coat of varnish or oil. It dries within 10-15 minutes, so you've got a quick solution for common long term timber issues. You can also use the liquid as a curative for wood boring insects, making it a versatile choice. Re-apply periodically to keep your structures stronger for longer.
• Can be applied to damp timber
• Interior and exterior use
• Water based, quick drying with low odour
• Coverage of 3 to 4m²/L per coat
• Low odour
• Non-flammable
• Recoat after 1 hour - dry within 10-15 minutes
• Protects against fungi, dry and wet rot, and wood boring insects
• Equipment can be cleaned with water
• Ideal application temperature of 15°C to 25°C
• HSE Reg no: 9530 & 10048
• Hazard safety codes: R50, R53
The preserver is simple to apply – its two coats can be applied using a brush or coarse spray to protect any smooth or rough bare wood. When used outdoors, it will be even more protected when finished with a coat of varnish or oil. It dries within 10-15 minutes, so you've got a quick solution for common long term timber issues. You can also use the liquid as a curative for wood boring insects, making it a versatile choice. Re-apply periodically to keep your structures stronger for longer.
• Can be applied to damp timber
• Interior and exterior use
• Water based, quick drying with low odour
• Coverage of 3 to 4m²/L per coat
• Low odour
• Non-flammable
• Recoat after 1 hour - dry within 10-15 minutes
• Protects against fungi, dry and wet rot, and wood boring insects
• Equipment can be cleaned with water
• Ideal application temperature of 15°C to 25°C
• HSE Reg no: 9530 & 10048
• Hazard safety codes: R50, R53
Technical Specification
Delivery Details
Collection Details
Reviews
Related products
Page 1 of 1
You might also like
Page 1 of 4