Router Bit Straight 1/4" : 3 x 12mm

By Silverline Product code: 67412 Pack size: Each

£1.39 Exc. VAT £1.16

Product Details

12mm length bits have single flutes, other lengths have twin flutes.

Size = shaft : diameter(D) x length(L).

Technical Specification
Brand Silverline
Manufacturer ID 790840
Length (mm) 12
Type Metric
Shank Size 1/4
Delivery details

DELIVERY OPTIONS (UK mainland only)

Next Day Delivery – £5.00 or FREE for orders over £25

  • Order before 9pm Monday to Thursday for next business day delivery
  • Order Friday to Sunday before 6pm for Monday delivery
  • Orders placed after Sunday at 6pm will be delivered the following Tuesday
Pre-12pm Delivery – £10.00 or £5.00 for orders over £25, to arrive before 12pm on the scheduled days above

Saturday Delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 6pm Friday)

Sunday delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 4pm Saturday)

Times may vary for items being delivered directly from the supplier. For more information, please visit our delivery information page Items over 30kg can only be delivered next Business Day Mon-Fri. Orders placed after 9pm Thursday will be delivered the following Monday
More about Delivery & Returns
Click & Collect details

Collection Details

We are fully open and delighted to welcome our customers into our branches. Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

We advise that you check your local branch is open on the branch locator page, before you visit.

Once you have placed your order online, we’ll have it ready for you at the branch you have selected in as little as 5 minutes. We will hold your order for 14 days, after which we will automatically generate a refund to the payment type you used to place the order.

Please wait for your text or email before coming to collect it and be aware that we will still have health & safety measures in place, so we ask that you observe the branch guidelines.

Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Router Bit Straight 1/4" : 3 x 12mm is rated 2.9 out of 5 by 49.
Rated 1 out of 5 by from Bit of a mystery Broke almost immediately. I was trying to cut a 3mm wide 4mm deep groove in 9mm plywood edge but only got about 5cm before the bit snapped off. I didn't think I was applying much force or cutting too fast. I'd bought two so went slower with the second bit with much the same result. The grooves were not clearing of debris I noticed which was burning in the second slower attempt. Bit of a mystery. Perhaps the ply has too much resin sticking the debris together? Perhaps I needed to cut 1mm deep at a time to achieve a 4mm deep groove? The bit looked well designed but it is the smallest with only a single cutting edge.
Date published: 2021-10-13
Rated 3 out of 5 by from Not exactly 3mm. But so cheap ...! The groove it makes is about 3.5mm when measured with callipers. This is in oak and it was the same for all three I bought. The one it replaced, from a cheap set I bought, created 3mm grooves. Hence try something else if you need exactly 3mm. However it is so cheap you can hardly complain! The groove it cut was fine and clean. How long it will keep cutting clean I don't know yet.
Date published: 2021-10-03
Rated 5 out of 5 by from Sharp and affordable. I am new to using a router but found this was very sharp and produced a very clean groove. I did break one because I pushed too hard but at just over a £, it was a cheap lesson.
Date published: 2021-09-02
Rated 5 out of 5 by from Excellent value for money Work really well on fine detail work. Just take your time if cutting deeper than 2mm.
Date published: 2021-08-31
Rated 5 out of 5 by from Router bit of class Great tool very accurate cut
Date published: 2021-07-20
Rated 1 out of 5 by from Router bits I bought 5 of these cutters for a job ,and all 5 snapped with in half an hour.
Date published: 2021-07-04
Rated 1 out of 5 by from Cheap but RUBBISH Absolute junk!!!! Bought 3 to run a 1mm deep channel in MDF. 2 managed about 30mm before breaking at the shank 3rd was so blunt it just burt. Cheap but useless - bought an Erauber and completed the job with no more problems. Buy cheap buy 10
Date published: 2021-06-27
Rated 3 out of 5 by from Good Value Good but a will not take much force. would recommend buying a few incase of breakage
Date published: 2021-06-18
  • y_2021, m_10, d_18, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_49
  • loc_en_GB, sid_67412, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 64.88ms

You might also like

Hey, browse our site often?