Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Use as a mortar or tile grouting gun. Ideal for re-pointing walls, filling gaps in patio slabs and grouting floor and wall tiles. Includes: mortar gun, filling scoop, straight nozzle, angled nozzle, grouting nozzle and plunger.
34203 includes: 5 x plungers, straight nozzle, angled nozzle, and grouting nozzle.

Technical Specification
Brand Roughneck
Manufacture ID 32-106/SF
Type Mortar Gun
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm
Due to temporary service restrictions our estimated delivery time is currently 2-3 business days
£5 Free
Turbo usually Next Business Day before 12 noon Temporarily unavailable £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Roughneck Mortar Gun Spares Kit is rated 2.5 out of 5 by 64.
Rated 1 out of 5 by from Useless for grout Originally bought to do some pointing however decided to try it on grout today. ABSOLUTELY USELESS. The plunger is a good 1mm+ smaller than the bore and it has a sizeable split in the plunger, checked the second plunger I got and the ones in the spare pack I bought separately. They all had this split and smaller than the bore. The leads to the plunger going past the grout and then when you pull it back it forces groutout of the trigger and end cap. Total waste
Date published: 2020-04-02
Rated 1 out of 5 by from Shocking Bought it ,lasted half an hour made runny mix ,took advice from other reviews , flange at top snapped with not much pressure. My advice would be as there's not a lot to do right now,wait till the weather's good and go old school,use a trowel.
Date published: 2020-03-28
Rated 1 out of 5 by from Not the best The mix has to very sloppy for it to pass through the end. I ended up going back to the traditional pointing trowel and hand board to get the job done. Installed brick slips and was hoping to use this to make life easier with the painting up.
Date published: 2020-01-20
Rated 5 out of 5 by from An amazing piece of kit This is the best tool I’ve bought for a long while. Such a time saver and a much better finish than I could ever achieve otherwise. Mortar mix needs to be just right/slightly on the floppy side otherwise it can jam. Also need to use soft sand, not sharp. Just need to make sure you wash it out thoroughly after use.
Date published: 2020-01-12
Rated 4 out of 5 by from Does what it says with a little modification!! Bought it to administer grout to wall tiles, having read reviews good and bad yes the mix has to be spot on, the main failure of this gun is the plunger is smaller diameter than the tube and has a split in it therefore the Grout / Motar can and will pass loosing pressure, to overcome this I cut a disc of rubber and placed it in front of the plunger. Now it works and saved me hours and hardly any mess. Wash thoroughly after use especially the threads.
Date published: 2019-12-11
Rated 4 out of 5 by from Good Mortar Gun A little tricky to load but works well
Date published: 2019-12-09
Rated 1 out of 5 by from Mortar gun Total rubbish, check the other negative reviews, totally agree. Not fit for the job.
Date published: 2019-11-09
Rated 5 out of 5 by from Review of roughneck mortar gun I used this gun with quite a sloppy mix using a plasticiser too. It worked perfectly for me, you just need to go relatively slow and make sure joints are filled fully. Don't wipe off any excess until the mix on the wall starts to harden off a little. I filled the gun from the nozzle end and kept pulling the the gun arm back to take the mix into the gun slowly. I do think that the threads on the top and bottom of the gun could be better as they do tend to jam up on the end caps. Keep everything clean and you should be able to use this for years.
Date published: 2019-10-30
  • y_2020, m_4, d_4, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_60
  • loc_en_GB, sid_34203, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 17.46ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.