Rawlplug R-KEM-II Polyester Resin Spare Nozzles

By Rawlplug Product code: 38346 Pack size: 5 Pack

£3.29 Exc. VAT £2.74
Selected
Quantity

Product Details

ETA approved. High quality bonded anchor. Styrene free polyester resin. Quick, secure and simple installation.

Product with wide spectrum of use in the medium load capacity area
The most convenient bonded anchor for general purpose use
Suitable for multiple use. Partly used product can be reused after fitting new nozzle
Suitable for use in non-cracked concrete and wide range of solid or hollow masonry structures. ETA Approval for 15 different substrates.
Also available in a great value pack with Heavy Duty Applicator Gun, see code 26278

Delivery details
 

DELIVERY OPTIONS (UK mainland only)

Next Day Delivery – £5.00 or FREE for orders over £25

  • Order before 9pm Monday to Thursday for next business day delivery
  • Order Friday to Sunday before 6pm for Monday delivery
  • Orders placed after Sunday at 6pm will be delivered the following Tuesday
Pre-12pm Delivery – £10.00 or £5.00 for orders over £25, to arrive before 12pm on the scheduled days above

Saturday Delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 6pm Friday)

Sunday delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 4pm Saturday)

Times may vary for items being delivered directly from the supplier. For more information, please visit our delivery information page Items over 30kg can only be delivered next Business Day Mon-Fri. Orders placed after 9pm Thursday will be delivered the following Monday
More about Delivery & Returns
Click & Collect details

Collection Details

We are fully open and delighted to welcome our customers into our branches. Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

We advise that you check your local branch is open on the branch locator page, before you visit.

Once you have placed your order online, we’ll have it ready for you at the branch you have selected in as little as 5 minutes. We will hold your order for 14 days, after which we will automatically generate a refund to the payment type you used to place the order.

Please wait for your text or email before coming to collect it and be aware that we will still have health & safety measures in place, so we ask that you observe the branch guidelines.

Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Reviews
Rawlplug R-KEM-II Polyester Resin Spare Nozzles (5 Pack) is rated 4.6 out of 5 by 38.
Rated 5 out of 5 by from Works just as Rawlplug say. I have not used resin anchors before and was anticipating problems with too fast setting from other reviews. Rawlplug's website provides technical info. showing drill sizes etc and indicates a working time of 2.5 minutes at 20 Celsius and 5 minutes at 15 Celsius. I found the resin remains workable for inserting the studding for a little longer in practice. Using M8 x 110 mm anchors, 8 vertical holes were drilled in brickwork and filled at a time. The dust must be cleaned out properly. A basic sealant gun was used with no problems as the resin is fairly liquid. The amount to use is hard to judge at first (about 50% of hole depth) and any excess needed wiping away before setting. I then used a plywood template to centre the studs accurately. The balustrade stantions were fitted with the nuts loosely tightened after 1 hour. They were fully tightened the next day. to allow the resin more cure time (probably unnecessary).. The whole was repeated after another day with two more short balustrades. The resin did not stiffen up in the tube except for about 3 mm just below the replaced cap - this was scraped out before fitting a fresh nozzle. Altogether, the system was easy to use and worked a treat - just follow the instructions!
Date published: 2021-10-08
Rated 5 out of 5 by from Excellent Excellent product to get more use out of a started tube.
Date published: 2021-10-05
Rated 5 out of 5 by from Rawlplug resin Used on loose paving, did an excellent job! Would highly recommend, and would use again.
Date published: 2021-10-02
Rated 5 out of 5 by from Much needed mixer nozzles Much needed mixer nozzles! Found the resin went off very quickly (less than 10 minutes) so needed more nozzles as needed to make adjustments to the fittings and found the nozzle had hardened as well
Date published: 2021-08-31
Rated 5 out of 5 by from Excellent product, easy to use. Stores for ages. Simple to use and sets solid. I prefer to use this instead of expanding wall bolts when it comes to fixing things to block / brick. Hung my hammock great in the garage. Once your done screw the cap back on and It will store for at least a year. Buy some extra mixer nozzles. Dig out any set resin from the cartridge prior to reusing next time you need it.
Date published: 2021-07-25
Rated 4 out of 5 by from Good product - worked well Good product...worked well to set some threaded rod in the ground to fix some pergola post bases in place.
Date published: 2021-07-22
Rated 4 out of 5 by from Works well Sets like a rock so does great job but be careful as it can set in a few seconds in warm weather. If your planning on using it over extended time i would buy a spare set of the nozzles.
Date published: 2021-06-23
Rated 3 out of 5 by from Resin Reservation Sets very quick had to change nozzle then a large section didn’t come out mixed I assume a faulty tube however it’s done the job of sealing cracked concrete window sills luckily I managed but if I need a full tube the loss of mixture halfway through would have bend major issue
Date published: 2021-06-12
  • y_2021, m_10, d_21, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_34
  • loc_en_GB, sid_38346, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 28.93ms
  • REVIEWS, PRODUCT

You might also like

Hey, browse our site often?

ADD TO HOME SCREEN