MDPE Wall Plate Elbow 25mm x 3/4"

By Aquaflow Product code: 44965 Pack size: Each

£7.38 Exc. VAT £6.15

Product Details

Technical Specification
Brand Aquaflow
Manufacturer ID 712.025
Warranty (years) 1
Diameter (mm) 25
Pack Size 1
Fitting Type Wall Plate Elbow
Suitable Systems Domestic & Commercial
Equal or Reducing Adapting
A Size 25mm
B Size 3/4"
Mounting Type Non demountable
Delivery details

DELIVERY OPTIONS (UK mainland only)

Next Day Delivery – £5.00 or FREE for orders over £25

  • Order before 7pm Monday to Thursday for next business day delivery
  • Order Friday to Sunday before 5pm for Monday delivery
  • Orders placed after Sunday at 5pm will be delivered the following Tuesday

Pre-12pm Delivery – £10.00 or £5.00 for orders over £25, to arrive before 12pm on the scheduled days above

Saturday Delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 6pm Friday)

Sunday delivery – £10.00 or £5.00 for orders over £25 & FREE for orders over £75 (order by 4pm Saturday)

Times may vary for items being delivered directly from the supplier. For more information, please visit our delivery information page below.

Items over 30kg can only be delivered from Monday to Friday. If ordered before 6pm, please allow up to two business days for delivery. Orders placed after 6pm Thursday will be delivered after the weekend.

More about Delivery
Click & Collect details

Collection Details

Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday. Please check your local branch is open on the branch locator page, before you visit.

Once you have placed your order online, we’ll have it ready for you at the branch you have selected in as little as 5 minutes. We will hold your order for 14 days, after which we will automatically generate a refund to the payment type you used to place the order.

Don’t forget your mobile number – Make sure your mobile number is added so that we can text you when your order is ready to collect. Please wait for your text or email before coming to collect your items.

If an item is eligible for Next Business Day Collection in branch, the order must be placed by 7pm Monday to Thursday for collection the next day. Orders placed after 7pm on Thursday, and up to 5pm on Sunday, will be available for collection on Monday. For larger items over 30kg, please allow two business days.

MDPE Wall Plate Elbow 25mm x 3/4" is rated 2.4 out of 5 by 19.
Rated 1 out of 5 by from Poor quality Won't take half brass bush without destroying the plastic thread, so effectively a one-time use fitting.
Date published: 2022-03-26
Rated 4 out of 5 by from Budget product, but great as long as you take care After reading the reviews of this product I was wary of the issues reported about the threads, and any material mismatch (brass to MDPE) is bound to cause issues. I tried the threads very carefully with one of my BIB taps and could see immediately what people were talking about - the thread would not start, and if you did get it to bite it seemed to cross thread immediately. Taking into account the prevous reviewers comments about heating the MDPE wall plate I applies PTFE tape to the tap threads and put the kettle on to boil. Holding the wall plate carefully I slowly poured boiling water into the threaded socket for a minute before then offering up the tap. with care to get keep the wall plate and tap square to each other I got the two threads engaged and once started they screwed together nicely. I screwed the tap in until just one thread remained and then straightened the tap in the wall plate before the mdpe cooled down. Once cooled, the tap is firmly held in position with the contraction of the mdpe and the wall plate is ready for mounting - obviously you could mount the wall plate, and use a heat gun to warm the MDPE carefully as the tap could get in the way of the top screw, but I was happier to fit the taps first and then mount the wall plate afterwards - either way, heating the wall plate and using PTFE tape makes the job of assembly much easier and using these with the low price is justified for the small amount of care required during assembly.
Date published: 2021-11-22
Rated 1 out of 5 by from Poor quality Cross threaded. Poor quality
Date published: 2021-10-11
Rated 1 out of 5 by from Poor quality. Complete useless cheap plastic
Date published: 2021-04-25
Rated 1 out of 5 by from Not the best water fitting I have used! Stripped threads very easily- took a chance on cheap component- didn’t work.
Date published: 2021-04-11
Rated 5 out of 5 by from Excellent quality for the money High quality for cheap price
Date published: 2021-01-04
Rated 5 out of 5 by from Cheap and cheerful Cheapest I found and has not issues. Does what it says it does
Date published: 2020-07-23
Rated 1 out of 5 by from Terrible thread.... As everyone else is saying, the thread on this item is terrible. After a lot of effort with the tap (also supplied by Toolstation) basically cutting its own thread into the plastic, I got the tap to fit. Remains to be seen if it leaks or not. I bought three of these & one was OK, the others not. Why doesn't Toolstation remove these poor items?
Date published: 2020-07-19
  • y_2022, m_5, d_26, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.27
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_17
  • loc_en_GB, sid_44965, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 29.44ms

You might also like

Hey, browse our site often?