Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Technical Specification
Brand JG Speedfit
WRAS approved
Manufacture ID UGSTV2525
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm
Due to temporary service restrictions our estimated delivery time is currently 2-3 business days
£5 Free
Turbo usually Next Business Day before 12 noon Temporarily unavailable £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
JG Speedfit MDPE Stop Tap 25mm is rated 4.9 out of 5 by 11.
Rated 5 out of 5 by from A real Godsend in certain circumstances. This 25mm 'pushfit' tap is a godsend in cases where one cannot isolate the water supply. In one such case recently I had this situation and having cut the supply pipe with proper pipe cutters ( essential to make the job speedy and prevent complications with rough pipe ends burrs etc). I then forced in the correct pipe insert ( essential) which was quite difficult with the water flowing. Anyway, having turned the tap 'on' to reduced the pressure on the fitting whilst being pushed into place. Once fitted, the tap was then turned off and - perfect no leaks or problems whatever.
Date published: 2020-02-23
Rated 5 out of 5 by from No brainer Did exactly as it says in the tin. Used to control pressure changing from lead to blue pipe
Date published: 2019-12-09
Rated 5 out of 5 by from Really got me out of a bad situation. I had a job which required cutting a 25mm MDPE pipe and fitting a Stop Tap whilst the pipe had to remain under normal water pressure. I had to then make a connection with mains pressure water rushing out of the pipe. Thank God I had previously read about this 'push fit' stop tap. Having been half drown pushing in the appropriate 'pipe insert' I then, with the tap in the 'open' position, forced on this Stop Tap. Fantastic! A really , really useful item in an emergency.
Date published: 2019-12-05
Rated 5 out of 5 by from Saved the day when the brass poly one was leaking! I originally bought one of the brass poly stoptaps to go on the end of my new 25mm MDPE supply. Was leaking like a sieve when the water was put on, despite being done up properly and having the correct pipe liner/insert installed. A quick trip to Toolstation to get this, and one of the JG inserts too, and it went on very easily and doesn't leak in the slightest. I'm sure the leaking poly was to do with my amateur plumbing skills, and the MDPE being slightly scored from when it was pulled through into the new extension. This seems much more forgiving though. It's slightly pricey, and slightly bulky, but it does the job and is getting boxed in anyway. I also imagine it would be slightly easier to operate than a traditional stoptap due to the large blue handle.
Date published: 2019-09-25
Rated 5 out of 5 by from Much better than a brass poly stopcock I tried to use a brass poly stopcock with 25mm MDPE and I could not get the joint to seal on the olive. It seems that others have had the same problem, which is caused by movement breaking the seal. This Speedfit was so easy and seems to be more resilient to small movements.
Date published: 2019-04-04
Rated 5 out of 5 by from Easy to fit Great to convert mains 25mm to 15mm
Date published: 2017-12-23
Rated 5 out of 5 by from Simple to fit Brought about a month ago simple and easy to fit, is doing what it's supposed too and is water tight,
Date published: 2017-08-01
Rated 5 out of 5 by from Good Standard blue plastic water pipe to 15mm copper. Work perfeclty.
Date published: 2017-02-11
  • y_2020, m_3, d_27, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_9
  • loc_en_GB, sid_87509, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.54ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.