Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

• Ideal for all flooring - softwood, fibreboard, hardwood
• Will not work loose - eliminates squeaky boards
• Flush neat fix without damaging board
• No pilot hole necessary

Technical Specification
Brand Floor-Tite
Width (mm) 4.2
Manufacture ID TFFT4255
Length (mm) 55
Diameter (mm) 4.2
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 8pm Mon-Sat (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Floor-Tite Tri-Lock Pozi Screw 4.2 x 55mm (200 Pack) is rated 4.4 out of 5 by 27.
Rated 5 out of 5 by from Very Good Flooring Screw I used these Floor-Tite Tri-Lock Pozi Screw after I replaced 2 sheets of 18mm P5 T&G Chipboard Flooring I then used them on the squeaky boards on the landing. I found these screws easy to use as no pilot hole is needed, I used a new bit to screw them in & out and the head of the screw remained perfect, and best of all the squeaky floor boards are no more very pleased.
Date published: 2019-11-27
Rated 4 out of 5 by from Top screws for flooring. These screws are top notch for all types of sub flooring material. I have used them with ply, chipboard and OSB and as long as you start them off slow they grab the material with their first few corkscrew like threads and then they drive in real nice thanks to thier coating. Only 4 stars due to the price compared to the quantaty, but I suppose they are specialised screws.
Date published: 2019-11-25
Rated 5 out of 5 by from Brilliant screws! These really work. Our floorboards squeaked and creaked and I was on the point of ripping them up and starting again - as a last resort I gave these a try. Result! Fantastic product.
Date published: 2019-11-21
Rated 5 out of 5 by from Good quality screw Did the job perfectly, not sure why they are painted blue (you end up with blue fingers when you use lots of them) but the quality is perfect.
Date published: 2019-11-16
Rated 5 out of 5 by from Tri lock screws Creaking floor boards no more I would recommend these if you have this problem.
Date published: 2019-11-06
Rated 5 out of 5 by from Just the Job! Good quality, good price, excellent service
Date published: 2019-09-20
Rated 5 out of 5 by from Big fan of these screws, do exactly what it says Been using these screws a while now, noticed some reviews less than positive... I reckon, THEIR issues lie with the screwdriver/bit they use, I like the pros, have lots of good quality bits, so, choose the best fit one, and when the bit wears...bin it! (Maybe the manufacturer COULD pop the correct size bit in every box, like when buying other brands of screws...just a thought?) These screws hold down well, CAN, be undone, and done back up a good few times, no drama.
Date published: 2019-06-25
Rated 5 out of 5 by from The best floorboard screws I have used The upstairs of a large 5 bedroom house had unbelievably creaky floor boards, I lifed up all the carpets to see that the old nails were loose, and the old boards were warped. I went to town with 3 boxes of these, I dont see why you would need more than the 45mm screws. they bite so well, and really pull the boards down. Just make sure you dont screw in to any pipes or cables, If you have any doubt, lift up the boards where you can to look underneath. I also propped up some boards as they had broken at the tounge and groove. Make sure you use a new/sharp PZ2 bit. A bonus that this is noticably cheaper than Toolstations main competitor
Date published: 2019-05-16
  • y_2019, m_12, d_9, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_24
  • loc_en_GB, sid_65750, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 105.02ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.