Expansion Vessel Bracket 5 to 24L is rated
Rated 4 out of
Lightweight for the size
It's a bracket! A little lightweight for the size of expansion vessel I had. But as it was in the corner below the boiler I'm sure it will be fine.
Date published: 2020-01-01
Rated 2 out of
Clive from Pembury
Not the most obvious way of fitting
We bought this bracket to fit the 18L Expansion Vessel from Toolstation but it doesn't come with the necessary not to attach it - you have to cobble something together yourself or the Expansion Vessel just wobbles-around on the bracket. We fitted in in the end after about an hour of making something our of an old plastic nut that would fit it to the Expansion Vessel.
Date published: 2017-06-21
Rated 3 out of
Strong but could be better designed
Because of restricted space I wanted to hang the vessel from the bracket on the same side as the angled bar but that forced the vessel too far out from the wall. It would be better if the bracing didn't get in the way so much.
Also the slot in the bracket was too narrow to sit snugly across the top of the expansion vessel so it rocked back and forth. I had to file out the slot wider and pack washers either side to get a firm fixing. After that there was not much of the vessel's thread left to screw on the adaptor so that had to be packed with rubber washers.
I think this bracket could be better designed to fit the expansion vessels available.
Date published: 2016-12-01