Need a quick, effective and permanent solution to the problem of rising damp? Dryrod Damp-Proofing Rods are the next generation of rising damp treatment, delivering high performance and speedy installation times.
The rods contain a powerful water-repellent material that diffuses deeply into damp masonry, curing to form a highly effective barrier to damp. The result? A damp-proof course which prevents further rising damp and helps the wall to dry out.
With these damp-proofing rods, there's no fuss, no mess and no stress - no costly pumps or lances are needed, with only standard tools required. Foil-wrapped packaging and a simple installation procedure means no spillages, and rods are accurately dosed with exactly the correct amount of water repellent.
Each rod is 180mm in length and 12mm in diameter, and designed to treat a standard 9" double skin brick wall. Rods can be cut to size for thinner walls, or you can combine up to two rods for thicker walls. Resizing the rods is easy if you use the Dryrod cutting tool - sold separately.
• Easy to work with - quick and effective rising damp treatment
• Quick to install - simply drill holes and insert the rods
• 180mm rod length - can be cut to size for different wall thicknesses
• 12mm rod diameter - fits pre-drilled 12mm holes along mortar lines
• Works on highly-saturated walls - even up to 95% saturation
• Accurate doses - exactly the correct amount of water-repellent
• No spillages - foil-wrapped packaging and easy installation
• Low hazard - rods are solvent-free, odour-free and non-caustic
• No specialist equipment needed - only standard tools required
COVERAGE (per 10m stretch of wall)
• 4.5" (115mm) wall thickness - 42 rods
• 9" (230mm) wall thickness - 84 rods
ACCESSORIES
• Dryrod cutting tool - see
58161• Dryrod hole clearing tool - see
24383
