Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Includes all sizes for the most popular sized down lights. Contains 51, 60, 65, 72, 75 and 86mm diameter hole saws, pilot drill arbor and hex key.

Technical Specification
Brand Toolpak
Manufacture ID BS-SET03-DL
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 8pm Mon-Sat (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Downlight Holesaw Kit (9 Piece) is rated 4.0 out of 5 by 68.
Rated 5 out of 5 by from ONE OF THE BEST SET'S very good for the money,how long will they last i do not know but they did a great job,well pleased.
Date published: 2019-09-09
Rated 2 out of 5 by from Alright for plasterboard, but not much else Within about 20 minutes the drill bit from the kit snapped, and then the cutouts for the arbor wore out within a few hours of use. I'm sure it would last a while if you were just using the kit on plasterboard would be ok but don't trust it on anything else.
Date published: 2019-09-03
Rated 4 out of 5 by from Good on plasterboard I got this set because it was the only one that did 72mm, works well on plasterboard But don't use it on MDF it goes blunt in seconds and burns its way through
Date published: 2019-09-02
Rated 4 out of 5 by from Don't expect too much It's badged as a kit for downlights - and for cutting holes in ceilings (plasterboard) it's absolutely fine. Having used it for that I needed to cut holes in kitchen cupboards for pipes and stuff. The blades went blunt in no time. But that's not what they advertised. It's OK when used for what it's intended for.
Date published: 2019-08-18
Rated 1 out of 5 by from Don’t buy blunt overpriced junk Opened pack saw about 15% teeth blunt. Went back assistant got another out just the same. Cheaply made junk don’t buy. The other reviews are either fake or they got a different manufacturer
Date published: 2019-06-30
Rated 5 out of 5 by from Just what I needed I purchased this set to do some home improvements
Date published: 2019-06-21
Rated 3 out of 5 by from Bit of a pain Bit of a pain having to keep disassembling it after every cut to clear the saw. Grub nut that holds the pilot drill keeps coming loose. Managed to do what I wanted to do.
Date published: 2019-06-06
Rated 2 out of 5 by from Reasonable price Purchased for a specific size of hole in 10mm plywood, very disappointed with the cutting performance, very difficult obtaining accurate cuts, even when workpiece cramped down on a pillar drill. You only get what you pay for !!!
Date published: 2019-05-29
  • y_2019, m_9, d_17, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_67
  • loc_en_GB, sid_90948, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 21.28ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.