Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

For the rapid removal of concrete and masonry materials including natural stone. Will outlast traditional abrasives. Fits standard 115mm angle grinder.

Technical Specification
Brand Toolpak
Manufacture ID CG100DR
Bore Size (mm) 22
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Diamond Concrete Grinding Disc 100 x 22mm Double Row is rated 4.9 out of 5 by 23.
Rated 5 out of 5 by from Good value Good value for money, used to grind off the edge of a raised 3x2 slab.
Date published: 2020-02-12
Rated 5 out of 5 by from Fantastic Bought this to going some latex screed and out performed my expectations
Date published: 2019-09-25
Rated 5 out of 5 by from This rotating disc will change your life following a bodged window cill repair i used this disc. It got my awful repair flat and smooth. Its a scary thing to wield as its very heavy and would probably take your block clean off. Go light at first would be my advice.
Date published: 2019-07-17
Rated 5 out of 5 by from Floor tile adhesive removal Bought to remove tile adhesive after removing kitchen floor tiles Done the job well and left a flat finish to allow for new floor to be laid Made light work of the tile adhesive although was quite dusty Sprayed water on the floor in areas but it turned the adhesive into thick clumps so found it easier to not wet the areas but this creates a lot of dust but it’s worth it with the finish u get from it Well worth it and does the job well
Date published: 2019-06-26
Rated 4 out of 5 by from Works well but may need work to run true Once fitted it grinds well to my expectations, but there is a minor design issue. the highly dished profile prevented the nut on my grinder from bottoming. The mating face on the arbor in not absolutely flat and the sum of these resulted in the disc running very much out of true. I found a snug fitting spacer washer which solved the clamp problem; then I rubbed the mating face on a diamond whetstone until the disc ran visibly true. After that the disc operation was fine.
Date published: 2019-06-17
Rated 5 out of 5 by from Seems to be very effective but fitting is crucial I found that the very 'cupped' shape of the disc prevented the grinder nut clamping on the central annulus. It clamped part way up the 'cup' walls. It was about 0.5mm out of true and bounced all over. I found a washer to act as a spacer. This made it run true, an then it was very smooth and effective. A good tool.
Date published: 2019-04-04
Rated 5 out of 5 by from Dimaond Cutter This was my last hope in removing old bitumen adhesive to enable the installation of new tiles, to my cloakroom floor. It did the job very well. Only issue was the dust created, which could only be expected.
Date published: 2018-10-19
Rated 5 out of 5 by from Concrete base edges Purchased and used this dressing wheel with Makita 125mm angle grinder to improve rain run off from concrete base to my workshop - dressed approx. 5 degree slope x 100mm wide x 20mtr long in less than 1 hour - you need goggles and face / dust mask as it very fast and very dusty -spent more time waiting for dust to clear than actual grinding - wheel shows little signs of wear other than paint finish from the segments.
Date published: 2018-08-21
  • y_2020, m_2, d_17, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_22
  • loc_en_GB, sid_62515, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 70.96ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.