2. Departments

    Close

    Support & Services

Free delivery When you spend £10
from 10 mins at 350+ UK branches
15,000+ products Now available
£24.97 Exc. VAT £20.81
Read reviews (14)
Quantity

Add to trolley for...
Collection Collection

- Change your branch

Check stock in your local branch

Delivery Delivery

Free Saturday Delivery on orders over £75

Login to save for later

Product Details

• 15mm push fit connector
• Schrader valve and gauge

Technical Specification
Manufacture ID DRTKA
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 10 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 8pm Mon-Sat (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Basic Dry Test Kit 4 Bar is rated 4.4 out of 5 by 14.
Rated 3 out of 5 by from Doesn't seem to fit any of the 2 pumps I have... Have 2 bike pumps but this doesn't seem to fit them...
Date published: 2018-12-16
Rated 5 out of 5 by from Great item. Great bit of kit especially for the price. Seems to be holding it's pressure.
Date published: 2018-04-05
Rated 5 out of 5 by from Pressure tester Does exactly what it is intended to do. well worth the cost to eliminate unwanted flooding on new instllations
Date published: 2018-03-21
Rated 3 out of 5 by from OK for the price At less than half the price of more 'pro' dry test gadgets, my expectations were fairly modest. It's good for detecting big leaks but probably not so good for picking up 'weeping' joints. The O-ring seal seems tight enough but the example I have suffers from a bit of gauge leakage. This means the pressure will slowly drop, even if there are no leaks on the system. Pressurising a leak-free 10m length of 15mm copper to 2 bar leaked out of the gauge down to 1 bar over about 25 minutes. Basically you'll find any leaks bigger than the small one the gauge already has.
Date published: 2018-02-27
Rated 5 out of 5 by from Perfect This device paid for itself the first time I used it. I tested some pipe work that was just about to be boarded over and found a pin hole in a soldered joint. From a safety point of view, probably best to test smallish sections of pipe, rather than whole systems, and keep clear of any push fit joints that might let go. Good price compared with the opposition!
Date published: 2018-01-06
Rated 5 out of 5 by from Does what it says Got this to test a shower and did the job fine
Date published: 2017-10-07
Rated 5 out of 5 by from Central Heating Joint Testing Tested a new circuit in house extension at 3 Bar to prove no leaks in inaccessible under-concrete existing pipes and in new soldered joints. Fairy liquid only showed bubbles at the rad compression fittings. Gauge dropped a tiny bit overnight. Then soldered into house cct and tested all. Boiler relief valve seems to go at 0.3 Bar but Test Kit proved whole cct sufficiently dry, which could have saved re-draining. Well worth the money for peace-of-mind and saving time possibly filling and re-draining system.
Date published: 2017-09-19
Rated 3 out of 5 by from Basic dry air test kit I purchased this to carry out a air pipe work installation test for lpg. First problem is no millibar signs making this a little frustrating, however with a bit of common sense I managed to overcome this with a second test point in millibar. It has a 15mm push fit fitting on the end and reads very clear at the moment.
Date published: 2017-08-07
  • y_2019, m_6, d_25, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_GB, sid_22400, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 71.11ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.