Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

10mm Segment height. For ceramic and porcelain tile cutting. Clean cut. For wet or dry cutting.



Expert quality blade designed with X-Tech Cutting technology for porcelain cutting as well as a range of tile and ceramic cutting applications. The continuous X-Tech rim blade offers a combination of long life, clean cutting and excellent value. Can be used for wet or dry cutting. (For use with a 115mm angle grinder or tile machine).

Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Abracs Tile & Porcelain Diamond Blade 230 x 25.4/22mm is rated 5.0 out of 5 by 16.
Rated 5 out of 5 by from Amazing Cuts Brilliant cutting disc, used to cut stone and porcelain tiles, like a hot knife through butter! Used to always mask up cutting lines to avoid chips but not necessary with this, perfect clean cuts every time. Cant recommend enough
Date published: 2020-02-21
Rated 5 out of 5 by from Works well I tried cutting travertine stone tiles with the blade that came with my tile saw. It just polished them. Bought this blade after reading reviews, what a great buy it's turned out. Cuts without pressure, as quickly as if tiles were ceramic. May seem a bit pricey, but finished the job ahead of time, saving more than twice the amount. Excellent
Date published: 2020-02-06
Rated 5 out of 5 by from The 'biz' Knife & butter come to mind. Made a tricky job of tiling, almost a pleasure.
Date published: 2020-01-24
Rated 5 out of 5 by from Fantastic blade Finally a blade that doesnt chip! I was warned about the tiles chipping when i collected them and they were awful with score and snap and blade that came with wet cutter. This was well worth the money, clean cut no chips at all when passed through slowly. Phew!
Date published: 2019-12-16
Rated 5 out of 5 by from Great value blade Cuts through hard porcelain tiles with ease,nice thin cut lines,have cut large m2 still going strong with no edge chipping.
Date published: 2019-12-02
Rated 5 out of 5 by from Great blade for 10mm 600mm porcelain floor tile Cut alot of tiles with this blade and only had to stop as it did bend slightly so wasnt giving straight cuts. No spelching or breaking at edges. Just be careful not to lean on the blade too much as it will bend after a while. Otherwise brilliant on 10mm porcelain tiles.
Date published: 2019-11-29
Rated 5 out of 5 by from Makes a nice clean cut I bought this blade to cut through some 9.5mm thick 600mm * 300mm porcelain tiles. I had to remove the brass insert in the centre to fit my tile cutter, it fitted perfectly once I had done that. The blade edge is quite thin, not much more than a pencil line, so you can cut quite accurately without losing a few mm off the edge as with thicker wheels. The blade cuts through the tiles with ease and leaves a nice smooth edge with minimal chipping to the face of the tiles. With porcelain tiles the normal ceramic blades just aren't up to the job, it was worth paying the extra for this blade.
Date published: 2019-11-14
Rated 5 out of 5 by from Excellent at cutting porcelain Purchased and used for cutting porcelain tiles 600x300 at 10mm thickness when doing my shower and found it to be the best available. Thouroughly reccomend it & good value for money.
Date published: 2019-11-08
  • y_2020, m_2, d_23, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_15
  • loc_en_GB, sid_61260, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 10.87ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.