Product Details
Sizes: 3, 4, 4.5, 5, 5.5, 6, 6.5mm. titanium coating. Lasts up to 3 x longer than HSS drill bits. Drills metal, wood & plastic. Split point cutting head.
Precision ground titanium coating. Lasts up to 3 x longer than standard HSS drill bits. Suitable for drilling a wide range of materials including metal, wood and plastic. Split point cutting head allows it to instantly grip the material resulting in higher precision, accuracy and significantly faster drilling speeds. Sizes: 3, 4, 4.5, 5, 5.5, 6 and 6.5mm with 1/4" shank.
Technical Specification | Brand | Abracs |
| Material | Wood |
| Pack Size | 7 |
Delivery details
Covid-19 Update
- Delivery is available but due to temporary service restrictions your order may take upto 3 business days to arrive
- We have temporarily suspended our Pre-12 and Saturday delivery service
- Once your order has been dispatched you will receive an invoice email with the courier details and your tracking number
- Alternatively go to MyAccount, click on your Order History, click on the TRACK icon to link through to the carrier website and the tracking details for your delivery
- If your order contains more than one item it may be split into two deliveries as we manage volume across our network
- Due to carrier constraints it is not currently possible to deliver age restricted items. Please use our Click & Collect service for these products
- Delivery direct from suppliers is now available and specific delivery times will be displayed on the product page
Please note items delivered by our suppliers are not available for the options above.
Delivery times may vary.
More about Delivery & Returns
Click & Collect details
Covid 19 Update
Click & Collect
- Safe contactless collection is available 7 days a week at our branches
- Our branches are open 8am-5pm Mon-Sat and 9am-4pm Sun
- Keeping our colleagues and customers safe and well and respecting stringent social distancing requirements is our number one priority – 2 metre rule enforced
- Our available product range will not require more than 1 person to lift
- Please see our guide to click and collect below
- Please ensure that your mobile number is added so that we can text you when your order is ready to collect
Call & Collect
Due to current trading conditions we have suspended our Call & Collect service until further notice.
If you are using our Click & Collect service please note the following:
- Order online or over the phone and collect in branch from 5 minutes later.
- Ensure you check stock is available for collection at your chosen branch.
- Check branch opening hours to ensure you have sufficient time to collect.
- For items not available for same day collection, place order before 7pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
- If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews ★★★★★ ★★★★★
Abracs Quick Chuck Titanium Pilot Drill Set (7 Piece) is rated
4.0 out of
5 by
15.
Rated 1 out of
5
by
Martin259 from
Drill bits super-glued in place
I bought this item for a DIY project to quickly drill and screw a series of 1/4" soft-wood batons together to make a frame. I was in this case using the 3mm size drill and made four holes before the bit detached from the hex base. Upon inspection, it genuinely looked like the bits had been attached to the hex base with locktite and torsional load sheared the bond.
I took it back to the shop and they very kindly swapped it for a new set. I got back to work with the new 3mm bit and began to think the breakage might have been a manufacturing defect, as the new one was behaving as intended. However at the very end of the build (approx. 75 holes drilled) the same thing happened, except this time the drill bit only partially pulled out of the hex housing, rotating as it did so.
Again on inspection, it looked like it was held in place with locktite, which seemed to quickly cool down and set again, holding the 3mm bit now halfway out of the hex body.
I have not tried the other size bits, however I would suspect this issue is systemic.
This issue could have a correlation with build-up of heat in the drill-bit/housing, though 1/4" softwood should not provide too much resistance. I can only imagine how these respond to being used on metal.
Customer Service: Would recommend.
This Product: Would not recommend.
Date published: 2020-05-21
Rated 5 out of
5
by
pam75 from
a very fast service
have only been buying from them recently but so far the
the service if very good
have bought various items from them
Date published: 2020-05-13
Rated 5 out of
5
by
Drill2020 from
ideal set
Ideal set well priced nicely made
Date published: 2020-04-22
Rated 4 out of
5
by
Bruce52 from
Good value for money
The set seems great and does a great job on pilot holes and such in the larger 4.0 mm range and up. The smallest one, 3.5 mm, came apart the first time I used it. However, using it as a standard bit, it works fine. You just have to switch the chuck back and forth.
Date published: 2020-04-18
Rated 1 out of
5
by
Jack h from
Don't bother
No impressed took one back. Thought try again snapped even quicker. Bought some Milwaukee at 4 times price but quality is different product basically
Date published: 2020-04-04
Rated 2 out of
5
by
Sl4tes1 from
You get what you pay for.
A cheep set of bits that I needed to get myself out of trouble, unfortunately after only 10mins of use on a worktop the 6.5mm bit sheared from the hex base.
Date published: 2020-03-23
Rated 4 out of
5
by
GeoffAP from
Value for money
Haven't used all the sizes yet but the one I have works/cuts very well.
Date published: 2020-03-07
Rated 5 out of
5
by
Nosnibor from
Time saver
I should have bought these a long while ago, so easy to use when doing a lot of pre drilling for screws.
Date published: 2020-02-10
Sign in 
Trolley 
This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here. 
