Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Suitable for use with Abracs holesaws. Includes pilot drill.

Technical Specification
Brand Abracs
Manufacture ID ABHSA1
Video click here
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Abracs Holesaw Arbor Hex 14-30mm is rated 4.4 out of 5 by 17.
Rated 5 out of 5 by from Great tool I used this tp cut the tap hole in a Franke sink, did exactly what I wanted
Date published: 2020-01-25
Rated 5 out of 5 by from Good arbor. Never used one of these with the pin drive mechanism before. Easy to use, large drive hex and a decent size grub screw to retain the drill bit. Very pleased.
Date published: 2020-01-15
Rated 4 out of 5 by from Good value Two sprockets screw down to lock the cutter. However, when the cutter is fully screwed tight the sprockets do not exactly line up. You need to back off the cutter slightly which results in slight play. A thin shim solves the problem, or just tighten the cutter and ignore the spockets. Also recommended you pre-drill the 1/4" alignment hole and replace the drill bit with solid 1/4" steel bar for more accurate cutting.
Date published: 2019-12-01
Rated 5 out of 5 by from Easy change holesaw arbour Easy, screw holesaw onto arbour then screw down other end which push spring loaded locking pins into holesaw. Very easy to change.
Date published: 2019-11-24
Rated 5 out of 5 by from Good Value I needed this for a new holesaw, but many outlets only had expensive ones. Just the job.
Date published: 2019-05-28
Rated 5 out of 5 by from Well engineered and accurate. I bought this arbor to go with a new 29mm Abracs hole saw to drill the tap holes in a very expensive bath. Nicely made unit which fitted the hole saw without any ‘slop’ in the threads and the combination worked perfectly.
Date published: 2019-05-18
Rated 5 out of 5 by from Good value Purchased along with a hole saw, great combination at a fair price
Date published: 2019-04-12
Rated 4 out of 5 by from Reasonable bit of kit for diy-er. I bought this, along with the same branded 57mm hole cutter as I had eight holes to cut. The tool was just a little fiddly to get through the holes of the saw but I got it on after a few tries. There are four holes in the saw, so two are used, depending on sizes I guess. Anyway, it was a tad tricky to fit and also, once tightened as much as possible, there was a slight twitch to the hole unit. This may make holes a little off but not enough to notice, really. The single biggest pain was that the item does not come with an allen key, so if you break the pilot bit, (supplied), You will need to either have or purchase a key in order to swap the bit over. Not a big deal but it should really be supplied, I believe! I think a professional user will find better reliability from a better quality tool, though but it does suit an occasional, low level user.
Date published: 2019-01-22
  • y_2020, m_2, d_20, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_13
  • loc_en_GB, sid_54008, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 78.98ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.