Minimal, contemporary, and perfect for creating a soothing lighting scheme within your home, we’re pleased to stock a range of interior wall lights here at Toolstation. With products from brands like Spa Lighting, InLight, and Integral LED, we’re confident we’ll have just what you’re looking for. Plug-in wall lamps If you’re looking for a fuss-free way to add ambience around your home, plug-in wall lights are an excellent solution. These small lamps simply slot right into any existing plug sockets and cast a gentle glow up and out across the walls around them. Their low level of brightness means these internal wall lights make for excellent nightlights in bedrooms or hallways. LED Wall lights If you’re looking for a more permanent solution, browse our selection of modern indoor wall lights including ceramic, glass, and chrome uplighters. Featuring elegant shades that hide a bulb socket, which will need to be wired through your walls, these lighting solutions cast a soft beam of light up your walls and onto the ceiling.

Types of indoor wall lights

Wired / hardwired wall lights – direct to mains, flush or concealed wiring.
Plug-in wall lights – come with cable + plug, ideal for retrofit or rentals.
Recessed wall washers / up/down lights – subtle wall illumination.
Reading/swing arm wall lights – for bedside or task lighting.
Integrated LED wall panels/strips – sleek, low-profile design.

Choose the right wall light for your space

Consider the following elements when deciding on a wall light for your home:

Brightness & beam direction: Decide whether you need uplight, downlight, or both. Check lumen output to match room size.
Mounting & wiring options: For new builds, wired units allow clean installation. For retrofit or where wiring is awkward, plug-in models save time.
Wall material & fixings: Brick, plasterboard, masonry – choose correct fixings (rawlplugs, wall anchors).
Design & finish: Choose a style and finish (brass, chrome, matte black) to match décor.
IP & location: If used in bathrooms or damp areas, ensure the IP rating suits the zone.
Control & dimming: Check whether fitting is dimmable, compatible with your switch type, and wiring supports it.

What mounting and fitting considerations should I check before installing a wall light?

First check the wall surface (brick, plasterboard, etc). Confirm the electrical supply point and whether the fitting is suitable (voltage, driver, dimmable if needed). Ensure the back-box or fixing is secure and rated for the load. For internal wall lights, a standard IP20 rating is acceptable in dry areas; if the location is subject to damp or splash (e.g., above a sink) you may need a higher rating.

What common mistakes should I avoid when installing wall lights?

Avoid mounting too high or too low (which can cause glare or shadows). Don't use a fitting not rated for the environment (e.g., use IP20 in a damp utility). Avoid inadequate fixings (wall-plugs/screws not suitable for the wall type). Ensure the fitting’s weight is supported and all cable work is done safely, following the wiring regulations.

Capsule Wall Lights

Related Categories

Filters

Filters