Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Product Details

Cuts clean and accurate holes in bricks and blocks. Has 1/2 BSP female fitment. Use with diamond core drill adaptor hex shank 84790 , or SDS shank 82224 . 400mm cores enable penetration through a cavity wall without the need for an extension bar. Not to be used on hammer action.

Technical Specification
Brand Mexco
Chuck Type SDS
Chuck Type Hex
Manufacture ID DC152
Length (mm) 170
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 10 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 8pm Mon-Sat (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Premium Dry Diamond Core Drill 152 x 170mm is rated 4.6 out of 5 by 37.
Rated 5 out of 5 by from Did the job Bought to drill two holes through a brick wall, each hole took about 40 mins at leisurely pace
Date published: 2019-03-14
Rated 5 out of 5 by from Does the job Made a clean hole with no more dust than expected. As often with these drills, once started I found they work better with the pilot drill removed.
Date published: 2019-02-20
Rated 5 out of 5 by from pretty good wasn't sure this would cope with my 18inch solid stone wall. especially as i only had my trusty 800w makita sds drill but it managed it. took a while but it got through eventually. with a more powerful drill o think it would have managed it in under 30mins. make sure your drill has a clutch or it could be a painful experience.
Date published: 2018-11-24
Rated 5 out of 5 by from Spot on! Bought this 162mm core drill to make a hole for 150mm cooker hood duct (so there was a bit of wiggle room for duct) and plesantly suprised how well it worked. Although bigger than recomended for dewalt diamond core drill I have it seemed to work OK with care. Got through double skin of red brick in about 30 minutes - that time included regular arm rests as I was drilling above shoulder height and core bit with drill is heavy.
Date published: 2018-10-20
Rated 5 out of 5 by from Great piece of kit I was having difficulty creating a hole for 40mm waste through a cavity wall so purchased this. Worked a treat. It grinds rather than drills with minimal dust. I had to draw it back and forth in order to widen the hole enough for the pipe but this was no challenge at it ground the brick away quite easily. The only negative is that it is not long enough to go through a cavity wall so you may need a long masonry bit to give you an idea of where to grind from the other side.
Date published: 2018-10-12
Rated 4 out of 5 by from Another part of the kit. Drilled for to extractor fan duct pipes with the core bit. Nice clean cut.
Date published: 2018-10-12
Rated 4 out of 5 by from Dia 52 core drill Needed to drill a hole down through floor and footings for water pipe 500mm long. Not used a core drill before and found it prone to jamming. Was best if the inner core was broken up with a chisel after every 10 - 15mm of cut then debris vacuumed out. Took about three hours but achieved the hole with little wear of cutting faces. Used 250lg arbor and 200mm ext bar. Read some added water but that just created a paste which jammed cutter.
Date published: 2018-10-06
Rated 5 out of 5 by from Good buy Needed a hole cutter diamond tipped . In stock Smooth cutting lots of life left in tips . Strong and well manufactured.
Date published: 2018-10-03
  • y_2019, m_3, d_23, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_37
  • loc_en_GB, sid_43448, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 40.6ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.