Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Product Details

Contains diamond core SDS adaptor, taper pilot drill and drift key.

Technical Specification
Brand Mexco
Chuck Type SDS
Manufacture ID A10SDS80PK
Length (mm) 80
Delivery details

Covid-19 Update

  • Free Next Business Day delivery for orders over £25 to home and site is available for orders placed before 5pm
  • Saturday and Sunday delivery is now available for orders placed before 4pm on Friday for Saturday delivery and 4pm Saturday for Sunday delivery, see here for details
  • We have temporarily suspended our Pre-12 delivery service
  • Once your order has been dispatched you will receive an invoice email with the courier details and your tracking number
  • Alternatively go to MyAccount, click on your Order History, click on the TRACK icon to link through to the carrier website and the tracking details for your delivery
  • If your order contains more than one item it may be split into two deliveries as we manage volume across our network
  • Due to carrier constraints it is not currently possible to deliver age restricted items. Please use our Click & Collect service for these products
  • Delivery direct from suppliers is now available and specific delivery times will be displayed on the product page
Order Value: Under £25 Over £25 but less than £75 £75 & Over
Next Business Day Delivery (Mon-Fri) usually before 6pm £5 Free Free
Pre-12 Delivery before 12 noon Next Business Day £10 £5 £5
Remote areas standard delivery (2-4 days) £5 Free Free
Saturday Delivery order by 4pm Friday £10 £5 Free
Sunday Delivery order by 4pm Saturday £10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details

Covid 19 Update

Click & Collect

  • Safe contactless collection is available 7 days a week at our branches
  • Our branches are open 7am-5pm Mon-Sat and 9am-4pm Sun
  • Keeping our colleagues and customers safe and well and respecting stringent social distancing requirements is our number one priority – 2 metre rule enforced
  • Our available product range will not require more than 1 person to lift
  • Please see our guide to click and collect below

  • Please ensure that your mobile number is added so that we can text you when your order is ready to collect

Call & Collect

Due to current trading conditions we have suspended our Call & Collect service until further notice.

If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 7pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Diamond Core Drill SDS Adaptor Pack 80mm is rated 3.5 out of 5 by 18.
Rated 1 out of 5 by from One use only I bought this as a replacement. Was using to drill a 117mm flue hole. The sds section snapped off inside sds drill.
Date published: 2020-05-27
Rated 5 out of 5 by from All the kit included All the kit included, good value.
Date published: 2020-05-25
Rated 5 out of 5 by from Does what it says on the tin! Good value for money! It’s no top of the range but I was very happy with the results.
Date published: 2020-05-17
Rated 1 out of 5 by from poor product Snaooed inside my drill. Had to buy a new drikl
Date published: 2020-05-14
Rated 5 out of 5 by from Quick and done thw job Done the job of getting a waste pipe through a 400 deep wall brilliant along with the hole cutter we bought with it
Date published: 2020-04-22
Rated 2 out of 5 by from Core drill extension. Bought to use with10cm core drill bit through brick cavity wall. Seemed solid but unsure of friction fit for guide drill Seemedd to start well. Unfortunately the thread connection with the bit stripped leaving the core drill embedded 1/2 into the first brick needeing to be cut/ levered out. Not sure if the problem was due to the bit or extension or brick or absence of a locking washer as another review suggested (only read after failure). May be ok for concrete blocks or softer bricks.
Date published: 2020-03-31
Rated 5 out of 5 by from Tough and Strong Ideal kit to supplement a diamond core drill. The kit comes with a masonry drill that fits into the holder with a tapered end ( Morse Taper) and a 'drift' piece that enables the drill bit to be released once the job is complete. The masonry drill bit is essential to keep the core shell centred.. It is advisable to drill the pilot / guide hole first all the way through with hammer action and then use the core bit,without hammer action to cut the main hole. The reason for this is that the core bit should not be used with hammer action but the masonry bit will penetrate easier with hammer action.
Date published: 2019-11-10
Rated 5 out of 5 by from Saved the day ! Drilling a 4 inch hole in 32inch thick stone wall and original item snapped in two. Looked for a replacement at a couple of local sources with no luck, then tried Toolstation. Ordered on line, collected within 20 minutes job done! Good quality item fitted hole saws perfectly
Date published: 2019-10-06
  • y_2020, m_5, d_29, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_17
  • loc_en_GB, sid_63767, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 18.34ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.