Mini Timber to Timber Joist Hanger 47 x 67mm

BPC Fixings Mini Timber to Timber Joist Hanger
Click here for full description
Product Pack Size Price Quantity
Pack Size
£0.39 ex.
Pack Size
£0.36 ex.
Pack Size
£0.41 ex.

Detailed Description

Galvanised, suitable for timber up to 100mm high. Width x height.

Additional information

  • Brand BPC Fixings

Related products

Mini Timber to Timber Joist Hanger 47 x 67mm is rated 4.8 out of 5 by 17.
Rated 4 out of 5 by from Mini Timber to Timber Joist Hanger 47 x 67mm Book and collect method was easy to use. It was confirmed immediately and when I went to collect, the staff were professional, easy talk to, helpful, and the order was ready to be collected without any delay,.... Excellent service. It is easy to install but there are too many screw holes without any indication to the necessary usage of holes based on the weight loads applied. I have used all holes fastening to the frame of decking and fastened two holes on the sides to sandewitch and hold internal joists firmly.
Date published: 2016-12-17
Rated 4 out of 5 by from Strong and effective, but an odd size I have used these many times. They are strong but I always have the same issue when used with standard studwork timber. At 71mm they are too big. Nobody seems to make 38 x 65 brackets (or at least I can’t find any) so I keep having to buy these. They do the job well, but they just don’t fit neatly.
Date published: 2017-11-12
Rated 5 out of 5 by from Stronger than it looks. Very useful for fencing. I used this to support the bottom of my fencing panels (one attached to each fence post) - I'd spotted the item listed for hanging beams etc in roofing, but looked - & proved to be, ideal for holding each fence panel in place while I screwed it to the fence posts. The holders listed under 'fencing' would have meant lifting the whole 6ft panel another 6ft into the air to slot it into place - rediculous!. The simple hanger I used made job a piece of cake! Very much stronger that it looks.
Date published: 2018-08-28
Rated 5 out of 5 by from Bargain I bought these for fitting a floor, roof and shelving to a tool shed I'm making. I had 45x70 timber and these fit perfectly with slight play for ease of use. Dimensions of these hangers was exactly as described. They feel a wee bit flimsy in the hand but are good and strong when screwed in. Saved me a whole lot of jointing and would definitely buy again.
Date published: 2017-01-23
Rated 5 out of 5 by from Spot on Originally bought the 50mm hangers but had to exchange for 38mm due to timber not being 3"x2" as ordered from builders merchant! Anyhow Toolstation exchanged the hangers no problem. Have used these before on a previous project but this time I used for a suspended ceiling, easy to fit and did the job.
Date published: 2017-06-05
Rated 5 out of 5 by from Quick and hassle free joints Building a decking area and these made assembling the joist frame a breeze - screw them in every 400mm, slot in the joists, add a screw or two to hold them solid and it was ready for the boards.
Date published: 2017-07-22
Rated 5 out of 5 by from Easy to use and very strong I fix one of these in the timber and then I am able to hold the beam in place whilst screwing the fixing, easy.
Date published: 2018-01-29
Rated 5 out of 5 by from Bargain ! Seemed quite flimsey but once in position no worries here. Would buy this product again!
Date published: 2017-12-01
  • y_2018, m_9, d_7, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_GB, sid_99265, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 1.97ms