Everbuild 710 Self Levelling Floor Compound 10kg

By Everbuild Product code: 87468 Pack size: Each

Add to trolley for...

- Change your branch

Check stock in your local branch

Product Details

Quick drying and easy to use. The flexible additive (latex granules) is included within the mix, no need for dosing or mixing. Contains 2 x 5kg bags of compound. Can be applied up to 6mm per application. Coverage 1.25m² at 6mm depth, 2.5m² at 3mm depth, 5m² at 1.5mm depth. Hazard safety codes: R38, R41.

Technical Specification
Brand Everbuild
Manufacture ID SLPUSTUB10
Safety Data Sheet click here
Weight (kg) 10
Delivery details

Covid-19 Update

  • Free Next Business Day delivery for orders over £25 to home and site is available for orders placed before 6pm Mon-Thurs and before 6pm Sunday
  • Saturday and Sunday delivery is now available for orders placed before 6pm on Friday for Saturday delivery and 4pm Saturday for Sunday delivery, see here for details
  • Pre-12 delivery service is now available. Place your order before 6pm Mon – Fri for next business day delivery by 12pm. Orders placed after 6pm Friday and before 6pm Sunday will be delivered by 12pm Monday. UK mainland
  • Once your order has been dispatched you will receive an invoice email with the courier details and your tracking number
  • Alternatively go to MyAccount, click on your Order History, click on the TRACK icon to link through to the carrier website and the tracking details for your delivery
  • Delivery direct from suppliers is now available and specific delivery times will be displayed on the product page
Order Value: Under £25 Over £25 but less than £75 £75 & Over
Next Business Day Delivery (Mon-Fri) usually before 6pm £5 Free Free
Pre-12 Delivery before 12 noon Next Business Day £10 £5 £5
Remote areas standard delivery (2-4 days) £5 Free Free
Saturday Delivery (order by 6pm Friday) delivered before 6pm £10 £5 Free
Sunday Delivery (order by 4pm Saturday) delivered before 6pm £10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details

Covid 19 Update

Click & Collect

  • Branches are now fully open and operating safely in line with government guidelines
  • Safe contactless collection is available 7 days a week at our branches
  • Our branches are open 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday
  • Keeping our colleagues and customers safe and well and respecting stringent social distancing requirements is our number one priority – 2 metre rule enforced
  • Please see our guide to click and collect below

  • Please ensure that your mobile number is added so that we can text you when your order is ready to collect
Everbuild 710 Self Levelling Floor Compound 10kg is rated 4.2 out of 5 by 85.
Rated 5 out of 5 by from Excellent results for what I needed A while back I fitted new kitchen units but were different dimensions than original, I have a tiled floor but not wanted to remove them and just wanted to cover with vinyl flooring but been unable to because of the gaps left with new units. I didn't know what to buy and also for the amount I needed. Took a chance with this and got perfect results. Only took 1 bag to fill the gaps to the kick boards, compound goes off fairly quick but enough to do the job. Really pleased with the results for gap filling, just poured lastnight and cured next morning to lay vinyl.
Date published: 2020-10-11
Rated 1 out of 5 by from Not self leveling, poor instructions Mixed precisely according to the instructions, I was left with a solid mass that was immediately unworkable with. By adding more water, I got something that at least flowed out of the bucket, but had to be troweled into place and was not self leveling. Instructions are clear and simple, but strongly warn you not to add more water - following them would appear to render the product useless!
Date published: 2020-09-20
Rated 1 out of 5 by from Didn't self level, lots of undulations. Inadequate Mixed and applied exactly as per instructions on a sand/cement screed substrate with 3 coats of PVA bond applied and the last allowed to go tacky. Depth of compound was approx 5mm. Trowelled across the whole area to be covered. Looked ok, just a few undulations for it to deal with and it seemed perfectly wet enough to do that when I left it. Unfortunately it cured with many undulations still present so I'm worse off than I was before applying it as it's now the right height but not flat. Very unhappy with it.
Date published: 2020-08-26
Rated 5 out of 5 by from Does the job Excellent product. Add the powder to the water as mixing , stayed usable for a good 20 mins , I used a cordless drill with paddle to mix as there instructions add the powder to the water I only used one bag for the area I needed , very happy with the result , a sachet of pva glue would be a good idea to add to the tub
Date published: 2020-08-20
Rated 1 out of 5 by from not fit for purpose all instructions followed precisely to find i had an extremely solid mass in the mixing container. after adding 2 liters more of water managed to knock it back to something that could be used in no way did it self level it had to be troweled to get anything like a smooth surface. if you are a diyer do not by this product it will catch you out
Date published: 2020-08-11
Rated 1 out of 5 by from Breaks up easily Used this on a garage floor and it is too soft, keeps dusting and is already taking up after 2 weeks of being down, mixed it properly so be careful what you’re using it for.... Won’t be using this product ever again
Date published: 2020-08-08
Rated 5 out of 5 by from Thumbs up for this. It’s only been a week so can’t comment on longevity but it was really easy to use simple instructions to follow would recommend.
Date published: 2020-08-04
Rated 2 out of 5 by from Non self levelling is more like it! Made up exactly as per the instructions, which warn you under no circumstances to add more water than stated. The resulting compound had the consistency of wall plaster, had to be trowelled quickly into place and left lumps and bumps all over the surface, due to not self levelling. Not what I was expecting at all, I’m afraid.
Date published: 2020-07-30
  • y_2020, m_11, d_28, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_85
  • loc_en_GB, sid_87468, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 14.73ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.

Hey, browse our site often?