Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Ideal for cutting plaster backed tiles, glass and ceramics. Spear-point carbide tip and a fluteless straight shank.
Contains 5, 6 and 8mm drills.

Technical Specification
Brand Toolpak
Manufacture ID TGS01
Type Drill Bit
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Tile & Glass Drill Bit Set (3 Piece) is rated 3.5 out of 5 by 38.
Rated 4 out of 5 by from As expected. Worked well. Satisfactory results and no issues.
Date published: 2020-01-24
Rated 4 out of 5 by from Does the job These tile/glass bits do the job as well as more expensive ones at a disposable price!!
Date published: 2020-01-24
Rated 2 out of 5 by from Low price for a reason you have to consider these as consumables, 1st use on tiles and all three dull.
Date published: 2020-01-19
Rated 5 out of 5 by from It's a tile drill... Drill holes in tiles cleanly, was cheap to buy. Not much more to add really!
Date published: 2020-01-17
Rated 1 out of 5 by from Waste of money Despite cooling with water while drilling, the heads of the two drills I used out of the set both broke off before I’d even drilled two holes!
Date published: 2019-12-18
Rated 1 out of 5 by from Very poor The 8mm tip broke off after two minutes and it hadn't even managed to make one hole in the tile. The second drill bit I tried barely makes an impression on the tile, although I am being very gentle with it. I'm going to throw them away.
Date published: 2019-11-02
Rated 1 out of 5 by from Poor quality Bought these in July and just got round to us using them. Did all that was required, plenty of water for cooling. Broke through the first hole, tip came off. Used the next size up for 2nd hole, plenty of cooling stuff. Broken tip halfway through. Third bit in the drill that broke too. Did not use excessive pressure. Ended up taking back and replacing with slightly better bits, one of which broke. Four broken bits for four holes taking up most of an afternoon! I knew the tiles were hard but with gentle pressure you would have thought they would be up for the job. A ten mile round trip that shouldn’t have been needed.
Date published: 2019-09-23
Rated 5 out of 5 by from Good bits Excellent drill bits to get into bathroom tiles
Date published: 2019-08-25
  • y_2020, m_2, d_24, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_35
  • loc_en_GB, sid_30133, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 69.73ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.