Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Heavy duty plasterboard fixing enables safe hanging of loads up to 71kg. Auto-adjusts to wall thickness, Suitable for use in 9.5mm to 15mm plasterboard.




Slim gripping wings open easily within the cavity to provide a secure anchor and distribute weight more effectively than conventional fixings or plugs. Auto-adjusts to wall thickness. Suitable for use in 9.5mm to 15mm plasterboard. Supplied with screws.
Undercutting tool cuts a recess into dot & dab, insulated and double thickness plasterboard that allows for successful installation of GripIt.
Ideal for hanging curtain rails, blinds, picture frames and bathroom fittings. No need for additional timber studs or brickwork anchor points. Removable and Reusable.

Technical Specification
Brand GripIt
Video click here
Pack Size 100
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
GripIt Plasterboard Fixing 25mm Blue (100 Pack) is rated 4.3 out of 5 by 27.
Rated 5 out of 5 by from When all else fails.. These really are a revelation. I used them to fix heavy radiators to a plasterboard wall. Just make sure that you exert firm pressure when tightening the fittings so that the retaining lugs grip the rear face of the plasterboard and don’t pull through prematurely. Your only other expense will be a 25mm hole cutter. Do it.
Date published: 2020-01-14
Rated 1 out of 5 by from 2nd generation product - Poor !! Ok- but manufacturers have dumbed down quality by using plastic parts instead of the original metal....
Date published: 2019-12-25
Rated 5 out of 5 by from Brilliant plasterboard fixing! Very easy to use, no matter which size is needed and no problem supporting heavy weights. Much better than other plasterboard fixings I have used.
Date published: 2019-12-20
Rated 5 out of 5 by from The best I've used Used them before the best
Date published: 2019-12-20
Rated 5 out of 5 by from Amazing service and delivery Ordered during the evening, arrived the next morning. Great website, great service.
Date published: 2019-12-12
Rated 4 out of 5 by from Does the job Seems to work ok but did not prevent the Gripit not working correctly
Date published: 2019-12-05
Rated 3 out of 5 by from Didn't grip me Tried these out for a set of new curtain poles and found them quite difficult to use. However I think this was partly due to the plaster board I put them in. I have insulation backed board which turned out to have a thick top skim as well. I used the tool which you can buy separately to cut the grove at the back so the wings can open when there is solid matter behind the board but still had trouble getting the wings to open and using any force broke the bit the screwdriver goes in making the product useless. I would advise using these only if you have standard plaster board and a bit of DIY experience. Also the instructions don't tell you to push the centre bit in before attempting to deploy the wings
Date published: 2019-12-05
Rated 4 out of 5 by from Great toolbox addition Very useful for heavier fixings.It was difficult to find a 15mm drill bit the common sizes being 14 and 16mm
Date published: 2019-11-17
  • y_2020, m_1, d_25, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_24
  • loc_en_GB, sid_56295, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 28.69ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.