Glass & Tile Drill Bit 8 x 65mm
by Toolpak Product Code: 92360 92360
Pack size: Each
(333)
£2.68
ex. VAT £2.23
Pack size: Each
20+ Available for delivery. Please see our updated delivery times for the Easter weekend below:
Easter 2024 Opening and Delivery Times
Product Details
Need to drill fixing holes in ceramic tiles, mirrors or glass? This tile and glass drill bit from Toolpak is designed with a spear-point carbide tip and a fluteless straight shank – perfect if you’re working with plaster-backed tiles, glass or ceramics.
Precision ground cutting angles ensure easy hole starting and reduced tile chipping. The bit must always be used on low speed with coolant and, if you’re using a percussion or impact drill, turn off the hammer action.
• Suitable for drilling ceramic tiles, mirrors and glass
• Spade-shaped carbide tip with fluteless straight shank
• Precision ground cutting angles for easy hole starting
• Reduced tile chipping for a professional job
• Always use on low speed with coolant (water)
• Not suitable for use on toughened glass
• For use in 10mm and 13mm capacity three-jaw chucks
• Must not be used on hammer action
Precision ground cutting angles ensure easy hole starting and reduced tile chipping. The bit must always be used on low speed with coolant and, if you’re using a percussion or impact drill, turn off the hammer action.
• Suitable for drilling ceramic tiles, mirrors and glass
• Spade-shaped carbide tip with fluteless straight shank
• Precision ground cutting angles for easy hole starting
• Reduced tile chipping for a professional job
• Always use on low speed with coolant (water)
• Not suitable for use on toughened glass
• For use in 10mm and 13mm capacity three-jaw chucks
• Must not be used on hammer action
Technical Specification
Delivery Details
Collection Details
Reviews
Related products
Page 1 of 1
You might also like
Page 1 of 1