£14.23 was £14.98 Exc. VAT £11.86

Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

For use with downlights where a switch is required. Can be used in conjunction with other Surewire junction boxes or replacement for current lighting systems including a loop-in ceiling rose . Has 2 power in/out connections, a switch connection and 7 light connections. Easy to wire and maintenance free

• Reduces the number of terminal connections saving time
• Cables are strain relieved, cut and stripped to same length
• Rated to 16A 250V BS EN 60670-22

Technical Specification
Manufacture ID SW7ML-MF
Voltage 250
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Surewire 7 Way Pre-wired Multiple Light & Switch Junction Box SW7ML-MF is rated 4.5 out of 5 by 13.
Rated 3 out of 5 by from Ok Did the job but not reset happy with the terminals which are a bit weak
Date published: 2019-12-07
Rated 4 out of 5 by from Simple idea, but fiddly getting a good connection These boxes are still easier than about any other way of wiring lights. Only downside is they don’t give a guide for tail length like you get on wago connectors. Just over 10mm looks to be right. I usually have half a mm of copper visible, but that way you are certain it’s not gripping insulation.
Date published: 2019-09-24
Rated 5 out of 5 by from Great Junction Box This has to be the easiest junction box on the market. Strip all the wires to the same leingth 10mm and insert them into the recepticals. what could be easier. The only thing easier would be to have someone else doing it for you. A great product I will be using them a lot more.
Date published: 2019-07-16
Rated 5 out of 5 by from Maybe less 1/2 star as it's a bit fiddly to use. Needing to wire 6 lights and a power feed to a 7th this is pretty handy. Don't think there is a simpler way and it's certainly tidier than several daisy chained junction boxes. Only downside really is getting 3 wires gripped ideally all at the same time. They need to stripped and shaped to suite the spacing. I would have been happier if the grip length was longer but having tried pulling wires out it seems to be adequate and their are strain relief clamps anyway. The alternative is a switched ring or radial. More connections but maybe less wire.
Date published: 2018-11-08
Rated 5 out of 5 by from does the job exactly I had a wall unit with 7 small internal light, this connector made the job easy and neat
Date published: 2018-09-06
Rated 5 out of 5 by from Makes life a lot easier. Being MF this a fantastic product. Simplifies the job, Neat, fit and forget.
Date published: 2018-06-22
Rated 5 out of 5 by from Simple and neat installation I used a mixture of the Surewire units to fit 11 Downlights and an additional central light in the kitchen. These simplify the installation giving a neat and logical run when installing cables. I will use these again and am happy to recommend them. A bit early to rate reliability, but given that they are fitted correctly and now sat under floorboards I cannot see what could go wrong!
Date published: 2018-04-15
Rated 4 out of 5 by from Neat way to handle spotlights and such. These boxes are a neat way to handle wiring a load of spotlights or similar. The terminals can be a bit variable, don't always grip the wire properly.
Date published: 2018-01-07
  • y_2020, m_1, d_18, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_12
  • loc_en_GB, sid_58205, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 33.79ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.