Forklift Tag Kit
Kit includes 10 AssetTag Max holders, 10 inserts and 1 pen.
An employer must ensure that a forklift is safe to use and that they are checked by a competent person prior to use for any damage, faults or wear. The AssetTag Max Holder should be permanently fixed at the point of access to the forklift. The insert details a list of checks to be carried out and the record is then to be completed. If it is unsafe the insert should be removed and a supervisor immediately informed.
Ladder Tag Kit
Kit includes 10 Holders, 10 inserts and 1 pen.
Work at Height Regulations came in to force in 2005 and apply to work at height where there is risk of fall liable to cause personal injury. This applies to both internal and external work at height and includes below ground level and low height. All ladders should be checked daily and prior to any use as well as at defined intervals for damage, faults, wear and tear as part of a risk assessment programme.
The AssetTag holder should be permanently fixed to the ladder in a suitable place. Perform an inspection of the ladder (a checklist is printed on the reverse) and record the result on the tag. If the ladder fails remove the insert and inform a supervisor immediately. These tags and inserts help manage the identification, safety and maintenance of ladders and help conform to work at height regulations 2005.
Scaffold Tag Kit
Scaffold must be inspected in the following conditions:
• Following initial erection
• Following exposure to any weather conditions that could affect its strength or stability
• Following substantial alteration (addition or subtraction)
• At regular intervals not exceeding 7 days from previous inspection
Tag size: 75mm x 180mm
Tower Scaffold Safety Kit
The Work at Height Regulations 2005 require an assessment to be undertaken before starting any work. Erection should be made to Prefabricated Access Suppliers and Manufacturers Association (PASMA) approved methods.
The Tower Scaffold Safety Tag provides an essential platform for entering and storing essential safety information, including movements and safe weight tolerances. Designed for use with the ClawTag holder, these tags can be fixed to the scaffold after erection without needing to dismantle part of the structure.
Essential safety and audit information can be referenced with the storage of these Inserts after job completion.
Tag size: 75mm x 180mm