Router Bit Template Cutter 1/4" : 1/2 x 3/4"

By Silverline Product code: 12799 Pack size: Each

£3.46 Exc. VAT £2.88

Product Details

For use with table mounted routers.
Size = shaft : diameter(D) x length(L).
Bearing(B) as diameter(D).

Technical Specification
Brand Silverline
Manufacturer ID 633631
Length (mm) 3/4
Type Imperial
Type Router Bit
Shank Size 1/4
Delivery details

Covid-19 Update

  • FREE Next Business Day delivery is available for orders over £25 for orders placed before 9pm Mon-Thur and before 6pm Sunday
  • Saturday and Sunday delivery is available for orders placed before 6pm on Friday for Saturday Delivery and 4pm Saturday for Sunday delivery. Items over 30kg can only be delivered next Business Day Mon-Fri. Orders placed after 9pm Thursday will be delivered the following Monday see here for details
  • Pre-12 delivery service is now available for weekday deliveries. Place your order before 9pm Mon-Thur for next business day delivery by 12pm. Orders placed after 9pm Thur and before 6pm Sunday will be delivered by 12pm Monday. UK mainland only
  • Once your order has been dispatched you will receive an invoice email with the courier details and your tracking number
  • Alternatively go to MyAccount, click on your Order History, click on the TRACK icon to link through to the carrier website and the tracking details for your delivery
  • Delivery direct from suppliers is available and specific delivery times will be displayed on the product page
Order Value: Under £25 Over £25 but less than £75 £75 & Over
Next Business Day Mon-Fri (order by 9pm Mon-Thur & Sun by 6pm) delivered before 6pm £5 Free Free
Pre-12 Delivery Mon-Fri (order by 9pm Mon-Thur & Sun by 6pm) delivered before 12pm next day £10 £5 £5
Remote areas standard delivery (2-4 days) £5 Free Free
Saturday Delivery (order by 6pm Friday) delivered before 6pm £10 £5 Free
Sunday Delivery (order by 4pm Saturday) delivered before 6pm £10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details

Covid 19 Update

Click & Collect

We are fully open and delighted to welcome our customers into our branches.

Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

Our speedy 5 min Click and Collect service remains one of the safest ways to buy from us and minimises your time in store. Place your order at 7 days a week, and travel to store once your collection confirmation is received by email or text message.

Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Your items will be held at your selected Toolstation branch for 14 days, after which point your order will be put back to stock and refunded automatically.

Router Bit Template Cutter 1/4" : 1/2 x 3/4" is rated 3.8 out of 5 by 9.
Rated 3 out of 5 by from Good value But... Good value but needs modifications to prevent the grub screw damaging your templates. Simply file a flat on the shaft below the bearing grub screw and file the grub screw until it clears the bearing diameter. Obviously not in the same league as more expensive cutters but perfectly adequate for occasional work. Run at low revs to prevent bearing from failing.
Date published: 2020-06-10
Rated 3 out of 5 by from Needs a shorter grub screw! The bit is supplied in a small reusable plastic case which is good. The tool was sharp and I cut hardwood with no tearout. The only down side is the length of the grub screw that retains the bearing. It sticks out too far and tears into the template or guide edge. Otherwise very good value for money.
Date published: 2020-05-20
Rated 2 out of 5 by from Cheap and cheerful, not precise I bought this last week to use for template cutting. The price is fair, however it is reflected in quality. The blades were slightly bigger than the bearing itself, causing damage to my template, and defeating the point of a bearing template cutter. Shouldn't have expected much for how cheap the product was.
Date published: 2020-01-27
Rated 5 out of 5 by from Excellent value I read one or two reviews about quality of these items and bearings failing but purchased anyway given the low cost. I've used several of these profile bits now to complete renovations of my kitchen and fitted wardrobes in a bedroom. They work well and I've never had a bearing fail. After trimming down quite a bit of mdf and chipboard they do lose their edge a little but given the contend of these boards I'd expect that. Longevity was no worse than a TREND bit, which I bought elsewhere at five times the price. If you treat these as a low cost, short term use item you won't be disappointed.
Date published: 2018-08-03
Rated 3 out of 5 by from Poor I bought four bits one didn’t have a bearing retainer screw I had to swap it with the other and neither seemed to last long, alright for diy I suppose I wanted touch for my money.
Date published: 2018-06-10
Rated 5 out of 5 by from Greay value As good as similar ones at much higher prices.
Date published: 2018-01-09
Rated 4 out of 5 by from great value at this price I bought this cutter to create some templates ready for routing out door hinges, went on to cut hinges in 12 doors and frames. the speed you can cut hinges and the quality of the cut is so professional, doing purely by hand even for a trained carpenter makes no sense. The cutter only lasted for the above period until it needed replacing, would have liked more usage but at this price can't complain
Date published: 2016-12-15
  • y_2021, m_6, d_17, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_7
  • loc_en_GB, sid_12799, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 69.42ms

You might also like

You know the drill, we all love cookies… the ones we use on this site are for analytics, personalising your experience and helping with our advertising to show you more of what we know you’ll love. By hitting accept, you agree to our website cookies.

Hey, browse our site often?