2. Departments

    Close

    Support & Services

Free delivery (see T&Cs) When you spend £10
from 5 mins at 350+ UK branches
16,000+ products Now available
£0.62 Exc. VAT £0.52
Read reviews (13)
Selected
Quantity

Add to trolley for...
Collection Collection

- Change your branch

Check stock in your local branch

Login to save for later

Product Details

1/2" length bits have single flutes, other lengths have twin flutes.

Size = shaft : diameter (D) x length (L).

Technical Specification
Brand Silverline
Manufacture ID 316753
Length (mm) 1/2
Shank Size 1/4
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 8pm Mon-Sat (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Router Bit Straight Imperial 1/4" : 3/16 x 1/2" is rated 3.9 out of 5 by 13.
Rated 3 out of 5 by from Good Surprisingly good cut for the price. Toolstation needs to up grade their product descriptions in general.
Date published: 2019-03-11
Rated 2 out of 5 by from Poor Quality First one broke a few minutes after use. Correct speed and only cutting about 4mm depth. Next one did finish the job but going very slowly. Get what you pay for. 8 of these or one good one.
Date published: 2017-12-03
Rated 5 out of 5 by from Outstanding Value Like another reviewer on here, their widely varying quality means I don't have great expectations from Silverline Tools. But I had about 25 meters of oak beading that needed some re-profiling. The choice was between a bit costing around £20 and this one at less than £2. Previous cheap router bits I've used haven't even completed a single pass through one length of chipboard without overheating and becoming blunt, but the price difference was so great I thought it might be worth a try, and to be on the safe side I bought 2. The good news was that these bits are TCT which is not included in their online description; the bad news was that they are limited to 24000 rpm max and I intended to use them in a single speed palm router at 33000 rpm. I expected them to overheat rapidly. I needn't have worried. I took it steady and one bit did the entire job without overheating and it still feels pretty sharp. On that basis I think these bits are outstanding value!
Date published: 2017-10-30
Rated 4 out of 5 by from Good tool for the price. I bought this tool for kitchen worktop clamp grooves and had no problems, done the job and tool is still sharp. Great
Date published: 2017-10-16
Rated 4 out of 5 by from Does the job This router bit stayed sharp for my whole kitchen fitment, and is reasonably priced. It took me a while to work out how the measurements in the description matched the item. (The cutting surface is 2" long with a 1/2" diameter.) It would be helpful if the picture was of the actual bit rather than a generic bit which is actually much shorter.
Date published: 2017-08-10
Rated 4 out of 5 by from Well made Good quality precision tool and excellent value.
Date published: 2017-07-22
Rated 1 out of 5 by from Useless Used it on 1 pass on worktop only 10mm deep & it burned out before it even got to the end. Threw it in the bin.
Date published: 2017-06-22
Rated 5 out of 5 by from Did the job Excellent value. Used this to cut 12 slots 37mm deep in fairly soft wood. Did the job with no problem - blades seem to have kept their edge. Would buy again if needed.
Date published: 2017-06-19
  • y_2019, m_10, d_15, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_GB, sid_92055, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 72.56ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.