Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Pressure operated with gauge showing output.

Technical Specification
Manufacture ID PRV1522
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Pressure Reducing Valve and Gauge 15 / 22mm is rated 4.1 out of 5 by 26.
Rated 5 out of 5 by from Works great but Bought this to reduce the mains water pressure into my house as we were having trouble getting hot water from the boiler. This worked a treat. One downside is I can't stop a small weep on the outlet side of the valve (even bought a bigger spanner to ensure that the olive had snapped as previous reviewers have noted. This has not worked so may have to look at another method of sealing it or replace the unit.
Date published: 2020-01-19
Rated 5 out of 5 by from Compact and value for money I was looking for a pressure reducing valve and had tried local plumbing merchants but they we too expensive so I tried a number of websites and found that Tool Station were the most competitive. I placed my order on the Friday and it arrived within a matter of days even though I live in Northern Ireland. When the valve arrived I was surprised how compact it was which was a bonus as I have very little room where I wanted to put it. It came with 22mm compression fittings but had 15mm inserts in case I had been using 15mm pipes so there would be no need to buy any extra fittings. I am very happy with my purchase as usual, thank you Tool Station
Date published: 2019-12-13
Rated 4 out of 5 by from Good valve but reducers are hard to use I needed to replace a leaking PRV. Existing pipework was 15mm so had to use the compression adaptors. Phoned Rob Pond (makers) to confirm how they work and guy was extremely helpful. But be warned, you won't get them tight enough in-situ. I cut the pipework out, fitted the PRV on the floor using big adjustables and lots of force and then joined it back in. If I fit another one of these to 15mm pipe I will use Conex 3 part reducers instead. If you have 22mm pipes it will be easy with the normal olives. If you need to install in an awkward place forget using the reducers as you won't be able to tighten them up.
Date published: 2019-11-19
Rated 4 out of 5 by from Solved overpressure problem Working fine to reduce pressure for 'boiling water' tap. However if fitting to 15mm pipe the reducing compression fitting is very hard to compress. I had to resort to a vice and large wrench to tighten. OK if fitting stub pipes before installation but would have been virtually impossible if fitting direct under a sink.
Date published: 2019-10-19
Rated 5 out of 5 by from No pressure issues now. Full flow at the required pressure. My pressure was too high and my pressure washer wouldn’t start up. No problem now.
Date published: 2019-07-18
Rated 5 out of 5 by from Does exactly whats expected Needed to replace an existing PRV in 22mm supply pipe to house. Easy to fit and is factory pre set to 3 bar but is easily adjustable if required.
Date published: 2019-07-18
Rated 5 out of 5 by from Does the job on waterfall tap I have a waterfall tap and the cold water had too much pressure. Closing the isolation valve slowed the water but was very noisy. Fitted 1 of these and problem solved
Date published: 2019-07-06
Rated 4 out of 5 by from not quite perfect Works OK but pressure increases when no flow, drops back to setting when water flows
Date published: 2019-06-06
  • y_2020, m_1, d_21, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_24
  • loc_en_GB, sid_11827, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 32.19ms

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.