Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details


• Brass
• Made in accordance with BS1010: part 2
• For connecting to MDPE pipe with liner

Technical Specification
Manufacture ID 10045495
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 10 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 8pm Mon-Sat (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Poly Stopcock 22mm x 25mm is rated 3.8 out of 5 by 8.
Rated 1 out of 5 by from Poor quality Fitted one, slight leak. Took it out and realised there are dink’s in the threads. Took it back for exchange and found dink’s in the others too.
Date published: 2019-06-26
Rated 5 out of 5 by from Excellent quality. I bought this for a stop tap for my new water pipe .
Date published: 2019-04-08
Rated 1 out of 5 by from Too sensitive to movements No doubt there is nothing wrong with this item but the compression joint to the MDPE pipe is very sensitive to movement and I could not make it seal properly. I then tried instead the JGSpeedfit stop tap and it seemed more resilient to small movements and was very easy to fit.
Date published: 2019-04-04
Rated 3 out of 5 by from Stiffness in the stop valve I have not fitted this item as yet but when trying to close/open the stop valve there is a good deal of stiffness in the valve mechanism on both of the stopcocks that I purchased. Because of this I cannot recommend this product
Date published: 2018-01-22
Rated 5 out of 5 by from Does the job Only one downside. Toolstation don't sell the 25 mm copper washers if you need to reuse the stopcock. As I did. Original washer will not come of the 25 mm pipe.
Date published: 2017-07-18
Rated 5 out of 5 by from Good Value Bought to replace an old and leaking stopcock on the main water supply. Some issues matching metric fitting with the original imperial supply pipe but got it done with a nice tight seal. Water back on and no leaks. Result.
Date published: 2017-06-19
Rated 5 out of 5 by from It works It's a brass stopcock. Standard compression fittings, no issues with installation. I expect it to last for years and see no reason why it shouldn't. Also, it was more economical than other suppliers which was a deciding factor.
Date published: 2017-06-16
Rated 5 out of 5 by from Its a tap - it works Needed to replace my existing leaking stop tap on the MDPE 25mm rising main. Normally I usually just replace the head to stop the leaking shaft (normal after years of service, I usually re-cut the seat too) In this case I had to replace the whole tap. This did the job just fine.
Date published: 2017-01-17
  • y_2019, m_7, d_18, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_GB, sid_16758, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 44.56ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.