Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Product Details

IP44. 140° detection angle 12m range. Adjustable 5 seconds to 5 minutes. Lamp not included - order 120W 78mm 53806 or 400W 118mm 73077 . This luminaire is compatible with bulbs of the energy classes A to E Cascade Holdings.

Technical Specification
Brand ZINC
Colour by dominance Black
Manufacture ID 260026
Wattage 400
Light Bulb Technology Halogen
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 10 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 8pm Mon-Sat (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Halogen PIR Floodlight 400W Black is rated 3.7 out of 5 by 126.
Rated 1 out of 5 by from Review Update So I have now had this light installed for 48hrs and I can confirm it's completely RUBBISH !! The PIR has a mind of it's own, no matter how much you try to configure the Lux and Sensitivity settings it will just revert back to something completely different. Comes on during the day when it's set for night time, then sometimes does not come on at all, then it might work at night but only if you put your hand almost covering the PIR lens, TOTALLY USELESS piece of kit !! I will be taking it down and taking it back to the store.
Date published: 2018-12-11
Rated 1 out of 5 by from Rubbish Bought this light to replace a similar looking 25 year old one which finally packed up. 10 minutes to swap, 30 minutes messing about but the PIR does not function. Lamp will some times light when it should not, mostly won't come on at all. Wish I had read the other reviews before wasting my time with this junk!
Date published: 2018-12-08
Rated 3 out of 5 by from value for money installed a few of these now, watch out for ordering the lamps as I clicked on the code below the unit and was supplied a 110v lamp caused a bit of head scratching and return visits!!! The casing is cast aluminium and decent quality, and with the right lamp works fine with either halogen or LED lamps, the rubber seal behind the glass needs some fiddling with to stay put and the captive screw isn't too captive and be lost in the bushes otherwise the connecting box at the rear is a bit busy with a side entry port for the cable no rubber grommet though would and have bought again cant go wrong if buying several for the price if only buying one might consider a better quality one
Date published: 2018-11-16
Rated 1 out of 5 by from Do not buy I bought 2 of these for a customer. I got a call next day to say they was flashing on and off. Replaced them twice for the same make and all three sets of two where faulty. Now had to be replaced with leds from your competitors. Costing me time and money. Absolutely useless lights do not buy.
Date published: 2018-11-12
Rated 5 out of 5 by from great value for money just remember you need to buy the bulb which is extra if you don't already have one - great customer service!
Date published: 2018-11-05
Rated 5 out of 5 by from halogen pir flooflight 400w works well good light but again no bulb supplied with fitting so you have to go looking for a bulb
Date published: 2018-10-31
Rated 3 out of 5 by from Poor quality I bought this today and fitted it. On inspection, cable gromit was missing, bulb holders had to be eased closer by 10mm to retain the correct bulb, cables awkward to connect because they had to circumnavigate the chocolate block, small screws and nuts holding the lamp unit to the bracket were difficult to fit due to inaccessibility, if nuts were captivated job would have been simple. Once fitted, lights works ok.
Date published: 2018-10-25
Rated 3 out of 5 by from Well shine a light on me .... Got off to a bad start with this lamp as the first one I bought refused to operate correctly (the PIR would not function) which was annoying as it took some to time to install and then had to be de-installed. I got the replacement working in my shed prior to connecting it to the wall and all was OK. The connector block to hold the cable set in the body of the unit is badly designed, as with the mains cable in situ it is impossible to get the connection block on the pins to hold it securely in place. Also, the old lamp had a 'permanent on' feature (I.e. One switches the lamp on and off quickly, and the lamp PIR sets and keeps the lamp on permanently till switched off...this feature does not work on the new lamp for some reason.
Date published: 2018-10-18
  • y_2019, m_2, d_17, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_125
  • loc_en_GB, sid_19937, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.64ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.