Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

• Fits new doors and frames with retro option strike plate for older frames
• Works with all 8mm door handle spindles
• Single 26mm drill bit required to fit latch

Technical Specification
Manufacture ID EL 57 PN
Finish Polished
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm
Due to temporary service restrictions our estimated delivery time is currently 2-3 business days
£5 Free
Turbo usually Next Business Day before 12 noon Temporarily unavailable £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Easy Latch Tubular Latch 3" Polished is rated 3.0 out of 5 by 14.
Rated 1 out of 5 by from Does not last long - cheap quality. Put these in 6 doors. Two already failed within three months so doors would not open. Metal inside is cheap, stiff in operation and breaks apart. Do not buy / fit.
Date published: 2020-03-29
Rated 1 out of 5 by from Not good The round latch that the catch sits in is RUBBISH!! The screws are too small and snap
Date published: 2020-03-10
Rated 2 out of 5 by from Great idea, not such a great product. The latch itself is fine however the circle strike plate is not. The screws supplied snap when screwing the srike plate in place. On my second attempt i cut the screws down first to avoid a repeat situation, this did work however when i unscrewed it again to reposition it slightly both screws were threaded and could not be re-used. In the end i just used the traditional strike plates also supplied with the kit.
Date published: 2020-03-10
Rated 1 out of 5 by from Looks like a good idea, BUT.... Not a great Idea, took longer to fit than a standard one, once you've knocked it in, unless its perfectly aligned you'll have to remove it and start again, easier said than done. And then after you've sheared off the tiny screws in the keep, you'd wished you hadn't bothered.
Date published: 2020-01-31
Rated 4 out of 5 by from Please note Easy to fit, just make sure you are aware of the edge of your frame when fitting keep
Date published: 2020-01-01
Rated 4 out of 5 by from Easy to fit Quick and simple to fit. Only little problem is the round striker plate screws far to small to do any good!!!!
Date published: 2019-12-22
Rated 5 out of 5 by from Brilliant design Makes fitting new doors with latches a doddle - tip - use a sharp 25mm drill and a 17mm socket to knock the latch squarely into door.
Date published: 2019-12-15
Rated 5 out of 5 by from Good latch Best latch I’ve used.. very easy to install Into a door with a 26mm flat bit.. will use these on all my jobs from now on :)
Date published: 2019-12-11
  • y_2020, m_4, d_4, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_GB, sid_79579, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 25.89ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.