Draper Heavy Duty Work Bench 4 Way

By Draper Product code: 63286 Pack size: Each

Add to trolley for...

- Change your branch

Check stock in your local branch

Product Details

Heavy duty portable workbench with dual clamping action and 12 holes for work clamping dogs. Folds down for secure and easy storage. Two-piece MDF worktop with quick release jaw function. Angled steel legs for increased stability with anti slip rubber feet. Maximum clamping width with clamping dogs 380mm. Max load 250kg. Supplied with four plastic clamping dogs and fixings. Weight approx 13kg. Flat packed with assembly instructions.

Technical Specification
Brand Draper
Material Steel
Manufacture ID 38121
Type Folding Workbench
Max Weight (kg) 250
Weight (kg) 13
Delivery details

Covid-19 Update

  • FREE Next Business Day delivery is available for orders over £25 for orders placed before 9pm Mon-Thur and before 6pm Sunday
  • Saturday and Sunday delivery is available for orders placed before 6pm on Friday for Saturday Delivery and 4pm Saturday for Sunday delivery. Items over 30kg can only be delivered next Business Day Mon-Fri. Orders placed after 9pm Thursday will be delivered the following Monday see here for details
  • Pre-12 delivery service is now available for weekday deliveries. Place your order before 9pm Mon-Thur for next business day delivery by 12pm. Orders placed after 9pm Thur and before 6pm Sunday will be delivered by 12pm Monday. UK mainland only
  • Once your order has been dispatched you will receive an invoice email with the courier details and your tracking number
  • Alternatively go to MyAccount, click on your Order History, click on the TRACK icon to link through to the carrier website and the tracking details for your delivery
  • Delivery direct from suppliers is available and specific delivery times will be displayed on the product page
Order Value: Under £25 Over £25 but less than £75 £75 & Over
Next Business Day Mon-Fri (order by 9pm Mon-Thur & Sun by 6pm) delivered before 6pm £5 Free Free
Pre-12 Delivery Mon-Fri (order by 9pm Mon-Thur & Sun by 6pm) delivered before 12pm next day £10 £5 £5
Remote areas standard delivery (2-4 days) £5 Free Free
Saturday Delivery (order by 6pm Friday) delivered before 6pm £10 £5 Free
Sunday Delivery (order by 4pm Saturday) delivered before 6pm £10 £5 Free

Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details

Covid 19 Update

Click & Collect

We are fully open and delighted to welcome our customers into our branches.

Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

Our speedy 5 min Click and Collect service remains one of the safest ways to buy from us and minimises your time in store. Place your order at toolstation.com 7 days a week, and travel to store once your collection confirmation is received by email or text message.

Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Your items will be held at your selected Toolstation branch for 14 days, after which point your order will be put back to stock and refunded automatically.

Draper Heavy Duty Work Bench 4 Way is rated 3.8 out of 5 by 50.
Rated 4 out of 5 by from Very sturdy but ......! I mentioned to my partner that the trusty 30+ year old B&D Workmate, that I use regularly, was very tired and could do with "replacing". (However, I'm not scrapping it!) To cut a long story short, she eventually bought me this product for Christmas. OK, to the pros & cons:- PROS: The framework, once constructed, is very sturdy/stable. (I don't know how anyone can call it flimsy; it's built like a tank & way better than the current B&D range!) Adjustable table work-bench height will probably be useful but yet to try it. CONS: I had to return the first one as the front table work-bench was damaged; large chip off one corner. Sadly, its replacement was also slightly damaged (rear table work-bench this time) but I've decided to live with it. There are also blemishes in the paint finish of some components but realistically, in use, it's going to get scratched/scuffed anyway. Assembly instructions could be better and ideally, two people constructing would be better than one as it's quite fiddly. However, I managed it solo. Although the number of components supplied tallied with the number stated in the assembly instructions, there appears to be a slight shortage of washers (2). The table work-benches, whilst a substantial overall thickness, don't seem particularly hard wearing. The surface finish is very thin and susceptible to damage (see above) whilst the core seems to consist of compressed/bonded wood-chip which will be porous. I'm planning to varnish the edges! If, like me, you're taller than the average male (5' 9" apparently) the highest working position is too low. I foresee back-aches during extended use. (I'm 6' 2") I'm yet to be convinced that a metal "worm-drive" going into a threaded plastic housing is a good idea. Time will tell. SUMMARY: In general I like the product but it could be so much better. Having only just constructed it, I can't comment on its longevity or practicality. In my opinion Draper should: 1. Use better quality material for the table work-benches, that will invariably take a battering over time. 2. Improve their packaging to prevent transit damage. 3. Increase the folding leg length to cater for taller users. 4. Improve quality control. 5. Use a metal casting under the table work-benches instead of plastic. Hope anyone reading this finds my observations useful. (Please note, I've scored only 2 stars for performance, specification & reliability as I have yet to actually use the product.)
Date published: 2020-12-29
Rated 1 out of 5 by from Very poor design Purchased a few years ago to replace a worn-out Black & Decker, was disappointed in it from the outset; but my opinions of it have steadily worsened. It requires a minimum of 3 - ideally 4 - hands to open and set up. 1 to hold the bench; a further 1 (ideally 2) to release the locking buttons/knobs; and a 4th to pull the legs/table into position. Once up, I was initially impressed with the "quick-release" slide mechanism for half of the worktop - until I realised after very little use - that it becomes both difficult to release and difficult to lock into position. The final straw was when - again after very little use - the screw mechanisms for the other half of the worktop failed, first on one side, and then on the other. Do not waste you money on this!
Date published: 2020-12-29
Rated 2 out of 5 by from Flimsy Even though it comes partially assembled, what remains is not without difficulty and headscratching, although the illustration on the box does help. It is flimsy and unsteady when assembled. The MDF top has sharp 90 degree corners - they could have been rounded off. I've managed to damaged the worktop edges in a short space of time. The rise and fall mechanism is terrible and leaves you with a beach deck chair scenario. I've left mine up as it refuses to work. Irony is I've now made my own workbench initially using this! The Draper is now sitting collecgting dust.
Date published: 2020-10-09
Rated 3 out of 5 by from Sturdy but vulnerable This was a bit tricky fiddly to assemble but everything went OK and its pretty sturdy, a good solid workbench. BUT.... Don't let it get wet! i left it outside in the rain for less than 2 minutes and now all along the edges and drilled holes the MDF has swollen and gone soft. I think that this may also happen over time if the workbench is stored in a damp environment.
Date published: 2020-09-07
Rated 1 out of 5 by from Total disaster Today I purchased a Draper Work Bench from Amersham. It took over 2 hours to almost put it together. It was extremely fiddly. At the last hurdle I found it short of 4 bolts for a back bar and that the plastic washers would not fit with the screw on handles on front. I should have sensed problems when I looked at the box at home and it was sealed with sellotape and there were no instructions. I had to write this negative as the given email address I am extremely disappointed. Today I purchased a Draper work bench from Amersham. Harrison 8610 I think was the code. It took over 2 hours to almost put it together. At the last hurdle I found it short of 4 bolts for a back bar and that the plastic washers would not fit with screw on handles on front. I should have sensed problems when I looked at the box at home and it was sealed with sellotape and there were no instructions. I am very disappointed. I had to post this review as the Toolstation email address didn’t work.
Date published: 2020-09-06
Rated 4 out of 5 by from Good product Better than a workmate to use. Very stable. A bit fiddly to assemble but worth the effort. There is a knack to folding it but once you know where you are on that it is fine.
Date published: 2020-08-09
Rated 2 out of 5 by from Very heavy duty - except where it matters This workbench has performed great for me, except now it is broken. The metal wormscrew (which close and open the workbench) go into a plastic nut, which strips after a while leaving you with a none working bench. Considering the heavy dydt contruction of the rest of the bench, a plastic on metal screw part makes no sense, and smacks of false economy from the manufacturer.
Date published: 2020-08-09
Rated 4 out of 5 by from superb Great and handy gor most jobs
Date published: 2020-08-06
  • y_2021, m_1, d_22, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_49
  • loc_en_GB, sid_63286, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 14.21ms

You might also like

You know the drill, we all love cookies… the ones we use on this site are for analytics, personalising your experience and helping with our advertising to show you more of what we know you’ll love. By hitting accept, you agree to our website cookies.

Hey, browse our site often?