Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

• Power input 350W
• 13mm drilling capacity
• Fan-cooled induction motor
• No-volt switch
• Chuck capacity 1.5 - 13mm
• 160 x 160mm square table with a rise and fall adjustment featuring a 0-45° tilt
• Throat depth 100mm
• Height 585mm

Technical Specification
Brand Draper
Manufacture ID 8657
Voltage 230
Wattage 350
Type Bench Drill
User Guide click here
User Guide click here
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm
Due to temporary service restrictions our estimated delivery time is currently 2-3 business days
£5 Free
Turbo usually Next Business Day before 12 noon Temporarily unavailable £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 9pm Mon-Fri (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
Draper 38255 350W 5 Speed Bench Drill 230V is rated 3.8 out of 5 by 18.
Rated 4 out of 5 by from good price so not the best but good for the price
Date published: 2020-03-01
Rated 4 out of 5 by from Bench drill Decent bench drill for the money. I use it mainly for drilling through wood. It does stop if you put too much pressure on it. Only gripe I have is that the chuck sometimes falls out.
Date published: 2020-02-15
Rated 4 out of 5 by from Its what you pay for... I have only had it a few days so why they invite you to review it so early I don’t know. However, I won’t be making components for a Swiss watch with it so I am sure it will serve my purposes for DIY. It appears to be solidly built machine. There is a little slack on the drive shaft above the chuck when lowered but doesn't appear to impact providing you make a decent dent with a centre punch first. When the shaft is fully retracted its solid with no movement at all and the same when its fully extended. Maybe the slack can be taken up with some sort of adjustment? The three lowering handles keep coming lose that will probably need some lock- tight to cure it. Changing the drive belt is easy enough but to get the belt tensioned correctly is an art I will have to master with time. Never owned a bench drill before but wish I had of done now. Up to date I have drilled mild steel and mahogany three inch thick. Great to be able to get a straight hole without deviating off at an angle with a hand drill! Overall, I am very pleased with it for the money, up to now. I purchased a DRAPER socket set in the early sixties and still serves me today, along with a DRAPER center punch! The fifteen product reviews were not available on the website for some reason. Cannot rate reliability at this stage so only three stars.
Date published: 2020-01-18
Rated 2 out of 5 by from Draper piller drill Would not have bought if I realised how much freeplay on the drill !! Will sell it and buy a second hand quality drill.
Date published: 2019-12-30
Rated 4 out of 5 by from Good DIY unit Very good bit of DIY kit, does what it should do for me.
Date published: 2019-09-25
Rated 1 out of 5 by from Very poorly made Too much free play on the drill
Date published: 2018-10-21
Rated 1 out of 5 by from Bad prouduct Broken plastic in guard assembly, dent in motor fan, very poor
Date published: 2018-08-31
Rated 4 out of 5 by from Bolt-Down Press for Lighter Materials My experience of Draper machines is that they last well and the drill shaft cuts straight without too much lateral movement. The depth gauge is a bit fiddly - it's basically 2 nuts which you tighten together and can work loose unless it's really tightened. As sometimes happens with this type of drill the handles can work loose (come unscrewed). Works well on fine grain wood although it has seized once so I wouldn't recommend it for heavy use.
Date published: 2018-08-08
  • y_2020, m_3, d_29, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_14
  • loc_en_GB, sid_83849, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 61.91ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.