Compression Reducer 15 x 10mm is rated
Rated 2 out of
Bought two of these because a 15 x 3/4" threaded fitting wasn't available from Toolstation. The 22 x 15 reducer is a one piece brass insert which operates by a crushing action on the copper tube when tightened. A few days after fitting, one of them had a very slight seepage. Tried tightening further but couldn't get a satisfactory seal. Went and got the threaded fitting from elsewhere and no further problems. I wouldn't use this size reducer again.
Date published: 2018-08-20
Rated 1 out of
I bought this to save buying a converting joint but it kept leaking ,had to use ptfe tape to seal it.
Date published: 2018-07-30
Rated 4 out of
I bought this 15 to 10mm reducer a few weeks ago, it works fine no leaks so far on the rad.
It’s not quite as polished as ones that I have used from another supplier but at 20p cheaper per fitting, plus I didn’t have to go out of my way to get it, job done!!
Date published: 2017-10-09
Rated 5 out of
It did the job.
Reduce 22mm to 15mm cheaply and neatly. I used ptfe tape for extra seal.
Date published: 2017-01-14