Bauker 2100W 1/4" & 1/2" Router 240V is rated
Rated 1 out of
Powerfull enough just not that accurate
I needed a big router and thought i would give a cheaper one a go, it would be ok for roughing out but the guide pillars have at least 1mm of play in or so making an accurate cut impossible, i will be taking this back tomorrow and buying something what will last.
Date published: 2019-04-27
Rated 4 out of
Yeh, it is a reasonable router for the money and you always get what you pay for. Quite a heavy machine, but has some good features. Annoying is the depth stop not staying in its place so when you lift the tool it falls out. The wing type screw to keep it in place has a spring, but in my opinion the spring is too large for the screw diameter making it hard to tighten to the correct position. Other than that a reasonable reduced price purchase.
Date published: 2019-04-22
Rated 4 out of
Last minute but
Had to buy this at last minute due to needing to use a bigger bit than my old router would take.Only used once to cut a worktop mitre but did the job perfectly.
Date published: 2019-04-16
Rated 2 out of
Instructions say it comes with a collet adapter and that you should not remove the 1/2" collet (just insert the adapter). It comes with a smaller collet instead of an adapter so you must find a way to dig the larger collet out if you want to use 1/8 shank bits.
Also, it can't be locked in the "on" position which makes it all but impossible to use in a router table.
Date published: 2018-11-11