Selected
Quantity

Add to trolley for...

- Change your branch

Check stock in your local branch

Free Saturday Delivery on orders over £75

Product Details

Microwave sensor performance remains constant and is unaffected by changes in heat or light which affect traditional PIR sensors.
• 1-8m detection radius (adjustable)
• 10 second to 12 minute on time (adjustable)
• 1200W recessed model, installation height 1.5 - 3.5m
• 2000W surface model, installation height 2 - 6m

Technical Specification
Brand Zinc
Colour by dominance White
Style Traditional
Delivery details
Order value: Under £10 £10 & over
Express usually Next Business Day before 6pm £5 Free
Turbo usually Next Business Day before 12 noon £10 £5
Remote areas standard delivery (2-4 days) £5 Free
Order Value: Under £25 Over £25 but less than £75 £75 & Over
£10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details
If you are using our Click & Collect service please note the following:
  • Order online or over the phone and collect in branch from 5 minutes later.
  • Ensure you check stock is available for collection at your chosen branch.
  • Check branch opening hours to ensure you have sufficient time to collect.
  • For items not available for same day collection, place order before 8pm Mon-Sat (4pm Sun) and you can collect Next Business Day (Mon-Fri) after 3pm.
  • If we have your mobile number, we’ll send you a text when your order is ready to collect.
Reviews
360 White Microwave Sensor Surface Mount is rated 4.4 out of 5 by 22.
Rated 5 out of 5 by from Works really well Works well, Iam using this in conjunction with an extractor fan so sensitivity had to be turned down or fan would run continuously
Date published: 2019-11-23
Rated 5 out of 5 by from Perfect alternative to unreliable PIRs These sensors are excellent value for money. At last a sensibly priced microwave sensor so we have an alternative to unreliable PIRs. Its worth knowing the front cover just twists off to reveal the connection terminals (tiny PCB soldered ones unfortunately). The instructions don't mention this so natural instinct is to unwind the 3 screws on the back, but all that does is drop the PCB off inside the still closed housing! Once connected it's necessary to spend a short time setting the sensitivity with walk tests, as these sensors can see through glass and if you fit them in a glass office in the wrong place you'll have problems. The sensitivity setting allows adjustment which actually works, after which you can set lux and timer. This sensor switches the incoming 230v to the output terminal, so you cannot use it to switch a low voltage circuit like some more expensive units.
Date published: 2019-11-20
Rated 1 out of 5 by from Great comedy value I'm laying in my bath, in the pitch black, waving my arms at it like I'm trying to summons a sea rescue, nothing! Luck was on my side though, somebody upstairs walks over it's location beneath and on come the lights. Saved....! (and no, I didn't put it in upside down) Bearing in mind that this is the same technology used in self driving cars which career into the back of buses for inexplicable reasons, I would steer clear. I replaced it with a good old-fashioned heat-detecting PIR and all is good in my bathroom.
Date published: 2019-10-04
Rated 5 out of 5 by from Perfect I bought pir noreal sensor and has to return. This is first class item easy to install And setup sensitivity
Date published: 2019-09-03
Rated 1 out of 5 by from DIRE! I read the reviews which seemed favourable so had one installed in a new wet-room. What you don't learn until you read the gumph in the packet is how extremely sensitive the darn thing is, it sees through doors and walls, I kid you not and said gumph says so too. So walk past a Closed door where it's installed it fires up and wastes energy, same with a stud wall. This would be perfect for a security sensor as it could be installed completely out of sight but behind a door or wall! Unless you home is built of solid concrete forget it, it'll drive you insane trying to tune it up down or sideways, then sometimes it won't work at all. Suffer a PIR!
Date published: 2019-08-06
Rated 5 out of 5 by from Meets the Need Bought this to bring on our garage lights automatically. We are in and out of the integral garage many times a day often leaving the lights on all day, forgetting to switch them off! This product is great, you can set the length of time the lights stay on and the sensitivity of the sensor. Good product, great price.
Date published: 2019-05-27
Rated 5 out of 5 by from Easy to fit. We were forever leaving the garage lights on, so fitted this switch. Does exactly what it says on the box, can’t fault it. Exceptional value for money.
Date published: 2019-03-24
Rated 5 out of 5 by from All movement sensors should be like this! I used one of these to replace a PIR controlling a bathroom extractor. The PIR switched on seemingly at random even when the room was unoccupied! Presumably it was detecting air movement - I guess caused by said extractor! The microwave version? Absolutely perfect!
Date published: 2019-03-02
  • y_2019, m_12, d_13, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_21
  • loc_en_GB, sid_82163, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 34.3ms
  • REVIEWS, PRODUCT

You might also like

This site uses cookies to store information on your computer. Some of these cookies are essential to make the site work and others help us to improve services by giving us some insight into how the site is used. You can view our cookies policy here.