180° PIR Sensor Black

By Zinc Product code: 11555 Pack size: Each

Selected
Quantity
Add to trolley for...

- Change your branch

Check stock in your local branch

Product Details

IP44. 180 degree detection angle, adjustable 5-12m range. Adjustable time delay 10sec to 7min. Switching capacities 220-240V max 1200W.

Technical Specification
Brand Zinc
Manufacture ID ZN-25151-BLK
Type PIR
Delivery details


Covid-19 Update

  • FREE Next Business Day delivery is available for orders over £25 to home and site is available for orders placed before 6pm Mon-Thurs and before 6pm Sunday
  • Saturday and Sunday delivery is available for orders placed before 6pm on Friday for Saturday Delivery and 4pm Saturday for Sunday delivery, see here for details
  • Pre-12 delivery service is now available. Place your order before 6pm Mon – Fri for next business day delivery by 12pm. Orders placed after 6pm Friday and before 6pm Sunday will be delivered by 12pm Monday. UK mainland only
  • Once your order has been dispatched you will receive an invoice email with the courier details and your tracking number
  • Alternatively go to MyAccount, click on your Order History, click on the TRACK icon to link through to the carrier website and the tracking details for your delivery
  • Delivery direct from suppliers is available and specific delivery times will be displayed on the product page
Order Value: Under £25 Over £25 but less than £75 £75 & Over
Next Business Day Delivery (Mon-Fri) usually before 6pm £5 Free Free
Pre-12 Delivery before 12 noon Next Business Day £10 £5 £5
Remote areas standard delivery (2-4 days) £5 Free Free
Saturday Delivery (order by 6pm Friday) delivered before 6pm £10 £5 Free
Sunday Delivery (order by 4pm Saturday) delivered before 6pm £10 £5 Free


Please note items delivered by our suppliers are not available for the options above. Delivery times may vary.

More about Delivery & Returns
Click & Collect details

Covid 19 Update

Click & Collect

We are fully open and delighted to welcome our customers into our branches.

Our opening times are 7am-8pm Monday-Friday, 7am-7pm Saturday and 9-4pm Sunday

Our speedy 5 min Click and Collect service remains one of the safest ways to buy from us and minimises your time in store. Place your order at toolstation.com 7 days a week, and travel to store once your collection confirmation is received by email or text message.





Don’t forget your mobile number – Please ensure that your mobile number is added so that we can text you when your order is ready to collect.

Your items will be held at your selected Toolstation branch for 14 days, after which point your order will be put back to stock and refunded automatically.

Reviews
180° PIR Sensor Black is rated 4.0 out of 5 by 122.
Rated 5 out of 5 by from Toolstation PIR An excellent device. Easy to install. Very good price.
Date published: 2020-12-30
Rated 5 out of 5 by from Cheap Reliable Sensoring, No G A Sensor For The Modern World
Date published: 2020-12-26
Rated 5 out of 5 by from Does the job perfect It's just the job, simple to wire and works great.
Date published: 2020-12-26
Rated 3 out of 5 by from Good product with poor design for installation Good product with poor design for installation. The unit is reasonably priced and functions as you would expect with a good pick up range. The small dials on the underneath of the unit allow changing of the settings for lux, time and sensitivity. Unfortunately the unit was not designed by someone who installs electrical items for a living. The cable access is only available via a slot and then a flexible grommet on the underside of the main body and would need to be cut out further if a larger cable was installed for some reason. The grommet and the access does mean that water ingress into the unit is unlikely from the cable and also forces a drip loop on the cable. The cable grommet access is in the middle of the main unit and comes out directly under the cover screw for the main unit which means fitting and tightening of the cover can be hampered by the cable coming in. The terminal block is above the cover screw and is also at a right angle to the cable entry meaning the cable has to snake from the entry to the terminal block, installation can be made easier by removing the terminal block from its holding post (just pull it off) however ensure you have measured the cable length required before final fixing. The unit has a strain relieving grip directly next to the terminal block which is useless. It is too close to grip the outer casing of a cable and still allow the inner cores to be terminated on the terminal block. Not a huge issue if you have no reason for the cable grip to prevent the cores from being pulled out of the terminal block but as the cable takes such a strange and difficult route to the terminal block then strain is unlikely to be an issue so I recommend just removing this clamp before installation. The unit is held to the wall by two screws on either side of the main body which are easily accessible for marking. Overall the unit is a good price and performs well and is very adjustable but the installation of the cable is far from ideal.
Date published: 2020-12-26
Rated 5 out of 5 by from Sensor for outside lights Replacement unit for one that died from old age. Really easy to fit and works really well
Date published: 2020-12-22
Rated 5 out of 5 by from Great sensor with ample sized connections box. Good sensors now that they've been improved ! Plenty of room for more than one cable, i.e. twin + earth in and twin + earth out to the light fitting. Good price too.Easily adjustable although contrasting adjustment knobs would be very beneficial- say white ones on the black p.i.r.s and black ones on the white version. Not the easiest things to see clearly, especially with the dark days we're having this December !
Date published: 2020-12-20
Rated 5 out of 5 by from Easy to fit and a good price This PIR is one of the best and a good price. I have always bought this type and it is one of the Easy ones to fit and set up.
Date published: 2020-11-23
Rated 1 out of 5 by from Garbage It appears the leak problem is solved because they now come with silicon seal, however the one I have does not detect further than two meters when it does work. !!! It’s going back.
Date published: 2020-10-29
  • y_2021, m_1, d_17, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_121
  • loc_en_GB, sid_11555, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_toolstation-gb
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 81.09ms
  • REVIEWS, PRODUCT

You might also like

You know the drill, we all love cookies… the ones we use on this site are for analytics, personalising your experience and helping with our advertising to show you more of what we know you’ll love. By hitting accept, you agree to our website cookies.
VIEW OUR COOKIE POLICY

Hey, browse our site often?

ADD TO HOME SCREEN