Bitumen & Flashing Primer
Solvent Based for priming felt, metals and concrete, wood and bitumen. Use on porous surfaces before remedial roof treatment, including pour and roll. Hazard safety codes: Xn, F, R10, R20, R21, R22, R40, R51/53, R65/67.
Cementone Aquaprufe Damp Proofer
Solvent free damp proofer that provides a flexible, rubberised bitumen, emulsion coating for interior and exterior surfaces. Ideal for preventing water ingress in walls and floors. Can be applied to damp surfaces and does not need a primer.
Cementone Flexacryl 5L
A flexible instant roof repair compound, ideal for emergency repairs or general maintenance. This product can be applied onto wet or damp surfaces. Coverage approx 1-2 litres per 1m2.
Cementone Tanking Slurry
Easy to use two-coat system. Mix with water and apply with a brush. Provides a waterproof coating for brickwork, concrete and stone. Suitable for above and below ground level. Resists positive and negative water pressure, and is water vapour permeable.
Evercryl Roof Repair 310ml
Instant roof repair even in damp conditions. Fits a standard gun. 72 hour cure. 1-2kg per 1m2 average.
Hazard safety codes: Xi, F, R10, R22, R36, R37/R38, R41, R46, R50/51, R53, R66.
Feb Silicon External Waterproofer
Deep penetrating water repellent. Colourless long lasting. Protects surface from discolouration due to pollution. Helps reduce efflorescence. Hazard safety codes: R10, R51, R53, R65, R66, R67.
Water based product which can be applied to damp surfaces. Protects against water penetration on wood, brick, concrete, roof felt etc. 0.75L per 1m2. Hazard safety codes: Xi, R22, R34/R35, R37, R38, R40, R50.
Thompsons Water Seal
Protection for bricks, stone and concrete. Prevents damage caused by freezing and thawing. Coverage up to 10m2/litre depending on porosity of the substrate. Hazard safety codes: R38.
Evercryl One Coat Roof Repair 1kg
Solvent based acrylic with reinforced fibres, giving instant roof repair even in damp conditions. 1-2kg per 1m2 average.
Hazard safety codes: Xi, F, R10, R22, R36, R37, R38, R41, R46, R50, 51, R53, R66.
All Weather Roof Coat
Solvent based coating with fibres. Fast drying and immediately waterproof. For coating wood, brick, concrete masonry, roof felt etc 1-1.5m2 per litre. Hazard safety codes: Xn, F, R10, R20, R21, R22, R38, R40, R51/53, R65/R66/R67.
Black Bituminous Paint
For instantly waterproofing wood, brick, concrete, masonry, gutters, fall pipes. 5m2 per litre for non porous surfaces. Not suitable for drinking water tanks.
Hazard safety codes: Xn, F, R10, R20, R21, R22, R40, R51/53, R65/R66/67.
Water based rubberised bitumen emulsion for internal and external use. Can be used on walls and floors to prevent water ingress and dampness from the ground. Can also be used on roofs and as wood block floor adhesive.
Hazard safety codes: Xi, R34/R35, R36, R37, R38, R50.
Roofing Felt Adhesive
Cold applied bituminous adhesive for bonding successive layers of roofing felt. 1-1.5m2 per litre. Hazard safety codes: Xn, F, R10, R20, R21, R38, R40, 51/53, R65/R66/R67.
Instant waterproofing for leaking flat roofs. Can be applied in damp conditions. A single pack elastomeric acrylic based (non bitumastic) compound. Adheres to virtually any roofing material. Includes built in draylon fibre reinforcement. Does not require special primers. Coverage 1m2 per litre. Hazard safety codes: Xi, R10, R36.