Fits all ½" BSP horizontal radiators, both open and closed systems.

Fits all ½" BSP vertical towel radiators, both open and closed systems.

Max inlet pressure of 15 bar.

To stabilize room temperature by maintaining constant pump pressure. Maximum temperature 110°C, maximum pressure 6 bar.

Maximum 4 bar. 1.5 bar precharged. Epoxy paint protection. WRC approved bladder.

Maximum 10 bar. 2.0 bar precharged. Epoxy paint protection. Complete separation between water & air.

Supplied with nuts and rubber washers.

Supplied with braided hose, manifold, 3 bar pressure gauge, pressure relief valve, isolating valve and double check valve.

Replacement head for valve, suitable for replacement on Honeywell body.

Inlet pressure adjustable 1.5 to 6.0 bar. Max inlet pressure 25 bar.

Temperature stabilising thermostatic valve.

Suitable for any flat, curved wall or domed surface. Supplied with compression fittings.

Suitable for any flat, curved wall or domed surface. Supplied with compression fittings.

Dedicated replacement part for most older generation Thorn Apollo boilers fitted with thermocouples.

Brass air vent without key.

Premium quality, manufactured to BS1566 (Part L Compliant). 28mm primary heating coil. G1B preferred size of primary connections. Foam insulation factory applied to save time and money. 1" Male screw connections for heating coil. 2.25" immersion heater boss, internal thread (Female). Cold and Hot draw off connections are both Female.

Indirect combination tank. Manufactured to BS 3198. 115L hot storage capacity, 40L cold. Insulation factory applied. 1" Male screw connections for heating coil. 2.25" immersion heater boss, internal thread (Female). Cold and Hot draw off connections are both Female.

Quick heating of water using multiple small bore pipe in the tank. 1" Male screw connections for heating coil. 2.25" immersion heater boss, internal thread (Female). Cold and Hot draw off connections are both Female.

Bronze Body. Light commercial / domestic applications. For use in secondary hot water and under floor heating as well as central heating systems.

Commercial in-line heating circulator. 1.5" screwed body connections. Comparable to Wilo SE125 and Grundfos UPS 25/55.

WRAS Approved. Made to BS 5423.

Snap on lid for cold water tanks.

By-Law 30 tank pack including lid, jacket and fittings to comply with English and Welsh regulations.

By-Law 60 tank pack including lid, jacket and fittings to comply with Scottish regulations.

For the cleaning of new and existing systems to restore circulation. Dosage 1 litre of cleanser to one hundred litres system volume.

Prevents corrosion, bacteria, scale and sludge in all types of indirect heating systems. Dosage 1 litre of system inhibitor per hundred litres of system volume.

Cures noisy central heating and restores heating efficiency. Doasge 1 litre of de-scaler to one hundred litre system volume.

• 3 in 1 system protector
• Noise reduction
• Scale prevention.

Once in the system it does not need to be flushed out.

Chrome plated.

Brass.

Brass

Plast