Departments

Made in accordance with BS 6675.

Fits in walls, ceilings or units. Fully detachable door for easy, unrestricted access. Made from High Impact Polystyrene (HIPS) and can be painted over if required. 154mm X 204mm.

Automatic flow rate stabilisation. Protects circulating pump when TRVs are closed in a heating system. Simple pressure setting.

Efficiently separates air and water from heating systems. Dry air vent system. Cap prevents accidental venting. Domestic or commercial use.

Automatically vents trapped air from sealed heating systems. Long life construction.

Multi jet water meter. For metering cold water up to 30C. Horizontal installation. Nominal flow 1.5 cubic m/h.

Combination valve featuring isolating valve, strainer and flow regulation. Water and energy saving. Flow regulator indicated on valve.

Mixing valve with high flow rate designed for low pressure bathfill. Rapid thermostatic failsafe protection. Working pressure 0.2-6 bar. Max pressure differential 10:1. 15/22mm universal 4-in-1 connections provide isolation, filtration, cross flow prevention and test point. Flat faced unions.

Mixing valve for group applications. Max number of outlets supplied is pressure and flow rate dependent. Working pressure 0.2-3 bar. Max pressure differential 2:1. 22mm 4-in-1 connections provide isolation, filtration, cross flow prevention and test point. Flat faced unions.

Mixing valve approved for basin, bidet, shower and high pressure bathfill. Rapid thermostatic failsafe protection. Working pressure 0.2-6 bar. Max pressure differential 10:1. 15/22mm universal 2-in-1 connections provide filtration and cross flow prevention. Flat faced unions.

Mixing valve approved for basin, bidet, shower and high pressure bathfill. Rapid thermostatic failsafe protection. Working pressure 0.2-6 bar. Max pressure differential 10:1. 15/22mm universal 4-in-1 connections provide isolation, filtration, cross flow prevention and test point. Flat faced unions.

TMV for underfloor heating applications. Suitable for systems up to 200 sqm. Temperature setting adjustable and lockable. Working pressure 0.2-6 bar.

Combination valve featuring isolation and strainer functions.

British gas approved. EN331 PN 25.

13mm (1/2") Mini-Rester. To prevent water hammer.

Suitable for use with washing machine & dishwashers. Prevents water hammer.

Eliminates water hammer in potable water systems.

Balances system water pressures, even in unstable conditions. Provides pressure balanced temperature control. Min operating pressure 0.3 bar.

Cartridge construction for ease of service. High flow rate design. Lift and turn adjustment.

Cartridge construction for ease of service. High flow rate design. Lift and turn adjustment.

Combination valve featuring isolating valve, check valve and strainer. Test points for system monitoring.

Plastic tundish with brass compression connections.

Isolating ball valve with test points for system monitoring.

Temperature stabilising thermostatic valve.

Made in accordance with BS1010: part 2
Brass. BSP parallel male thread.

BS1010: part 2. DZR. BSP parallel male thread.

To suit a 1/2" bibtap.
15mm x 300mm Copper tube.

Made from brass in accordance with BS1010: part 2.

Simple to install. For use in hard and soft water areas. 0.5 to 10bar. Includes 2m tube and speedfit connections.

Made in accordance with BS1010: part 2. Brass. For connecting to MDPE pipe with liner.

Gas approved to EN331: 1998. Full bore. PN25 rated. Suitable for gas, water and oil.

Chrome plated. Water only.

Made in accordance with BS 6675.

Made in accordance with BS 6675.

BS 6282.
Brass.

BS 6282. DZR.
Suitable for hard water areas.

3/4" BSP parallel male thread.

Body and cap hot forged in brass. Stainless steel 400 micron filter.

Made in accordance with EN1254-2
WRAS approved.

Heavy pattern. Glanded. Made in accordance with BS 2879/80. Brass.

Heavy grade.

Light pattern. Brass.

Light pattern.