Hand Tools > Plumbers Tools
- Saws
- Assorted Blades
- Knives
- Hammers
- Tool Storage
- Bolsters & Wrecking Bars
- Carpenters Tools
- Screwdrivers
- Levels
- Lasers
- Detection Equipment
- Tape Measures
- Cutters & Snips
- Staplers
- Router Jigs
- Work Benches & Trestles
- Clamps
- Vices
- Pliers
- Electricians Tools
- Engineering Tools
- Wrenches
- Trowels
- Builders Tools
- Contractors Safety
- Plumbers Tools
- Plumbers Torches & Accessories
- Drain Rods
- Roofing Tools
- Landscaping Tools
- Axes, Picks & Sledgehammers
- Pruning
- Ground Drainage
- Landscape Fabric
- Irrigation
- Sack Trucks
- Waste Bags
- Access Equipment
Waterproof fibreglass mesh bonded with 180 grit silicone carbide grit on both sides. Can be used wet or dry. Suitable for deburring copper & metal pipe and cleaning inside fittings.
Bearhug Adjustable Wrench Kit
Enables work on back and tail nuts under basins and baths with restricted access. Includes 1/2" and 3/4" Bearhug adjustable tap wrenches, 3/8" Ratchet socket wrench, 3.3/8" and 6.3/8" Extension bars. Durable polypropylene case
Boiler Service Cleaning Brush Set
Comprises: 12" handle, 12" extension, 2"x6", 5/8"x6", 1"x2 1/2" & 4"x1 7/8" nylon brushes, 3/4"x3" wire brush and 9/16"x2" phosphorus bronze brush.
Central Heating Protector
Advanced formulation protects against scale, corrosion & bacterial growth in all types of indirect heating systems. 400ml treats 100 litres of system water. For use with Rapid Dose Tool Kit (Code 71573).
Channellock Griplock Pliers
Tongue & groove non-slip jaws, made from heat treated high carbon steel. Comfort grips.
Right angled teeth that grip in all directions for maximum bite.
9.5" version has 5 adjustments, 32mm capacity.
12" version has 6 adjustments, 57mm capacity.
Right angled teeth that grip in all directions for maximum bite.
9.5" version has 5 adjustments, 32mm capacity.
12" version has 6 adjustments, 57mm capacity.
Circulating Pump Head Keys
Comprises:4 x 150mm, 4 x 200mm & 5 x 250mm T handle, ball point hex keys.
Fits most domestic pump heads
Fits most domestic pump heads
Drain Unblocker
- Flexible 6metre long rod
- Spring end to help clear blockages around tight bends
- Handle rotates rod to dislodge stubborn blockages
- Circular storage drum ensures rod is easy to extract and retract
Manhole Cover Key Heavy Duty
Suitable for non-locking covers and pedestrian duty broadsted.
Lifting capacity 30kgs
Lifting capacity 30kgs
Mini Crutch & Wheel Head Key
Enables hard to access valves to be reached and opens up infrequently used valves that are normally impossible to turn by hand.
For use on 15mm, 22mm and 28mm valves. Overall length 220mm.
For use on 15mm, 22mm and 28mm valves. Overall length 220mm.
Multi purpose key to suit 1/2" & 3/4" square stop cock valves and crutch head valves. Pointed handle for opening stop cock covers.
Multi Purpose Plumbing Tool
Fits Tank connectors 15mm, 22mm & 28mm (internal and external lug), Tank connector with 1/2" internal hexagon, radiator valves 1/2" internal hexagon (with or without internal lugs), 1/2" radiator air vent plugs, Radiator air vent (bleed) pin.
Holds new sink and basin wastes whilst fitting
Holds new sink and basin wastes whilst fitting
Push Button Pliers
Slim jaws. Quick action setting via push button selection.
Twin-sided machine groove locking mechanism provides non-slip grip.
Twin-sided machine groove locking mechanism provides non-slip grip.
Ratcheting Adjustable Wrench
Converts from standard adjustable wrench to ratchet wrench at the press of a button without removing the tool from its position
Service Cabinet Key
Versatile plastic key suitable for radiators, water, gas and electric boxes
Split Ring Compression Fitting Spanner
Ideal for working in restricted areas such as boilers, motorised valves and closely aligned pipes.
Squeeze Off Tool
Clamps up to 25mm plastic pipe for effecting repairs without draining down the system or turning off the water supply
Removes stiff tap backnuts from 1/2" and 3/4" BSP taps.
Uses mechanical advantage of the thread of the tap tail to remove stiff nuts.
Enables rapid tap installation.
Includes cordless drill and ratchet attachments.
Use with tommy bar (not supplied) or cordless drill on lowest torque. Supplied with Stickfast sticky washers and full instructions.
Uses mechanical advantage of the thread of the tap tail to remove stiff nuts.
Enables rapid tap installation.
Includes cordless drill and ratchet attachments.
Use with tommy bar (not supplied) or cordless drill on lowest torque. Supplied with Stickfast sticky washers and full instructions.
Tap Reseating Tool Professional Set
Renovate taps with these BS1010 & & BS5412 & Tap Reseaters made from electro plated steel. Parallel threads for a square fit & no thread stripping. Spring action for constant cutter pressure and lock nut for correct depth setting
Universal Stopcock Key
Accommodates 1/2" and 3/4" crutch head pattern stop valves and 1/2", 5/8", 3/4" and 1" square stop valves all in one durable tool.
Handle can be used at either end.
Handle can be used at either end.
Use for blocking off drain pipes. Fitted with removable top caps and rubber rings.
Use to tighten and loosen 15mm and 22mm compression fitting nuts.
Copper Tube Socket Former Set
Kit includes an expander tool, 15 & 22mm expander heads and a plastic bodied deburrer in a metal carry case.
Multi Size Radiator Key & Ratchet
For speedy assembly of most valve tails to radiators.
- Blows blockages away in slow running sinks, basins,
baths and showers.
- Pressure relief valve.
- Complete with adaptors.
To fit 4, 5 and 6mm hex-headed grub screws, vent plug and rotor shaft slot on most domestic circulating pumps.
Long Handled PVC Pipe Cutter
Heavy duty ratchet cutter suitable for cutting pvc pipes up to 63mm. Length 630mm.
Zinc plated steel spanner with comfortable, slightly offset handle.
For 3/8" & 10mm square section radiator vent plugs & bleed screws
For 3/8" & 10mm square section radiator vent plugs & bleed screws
Radiator Valve Change Kit
Allows system to be sealed by producing a vacuum, thus valves can be changed without draining the system.
Use in conjunction with Central Heating Protector Aerosol Canister. Includes a standard filling loop tool as well as 4 easy and time efficient adaptors enabling effective dosing via different parts of the central heating system.
Full instructions enclosed
Full instructions enclosed
Made from tough plastic. Marked in millibars, the scale adjusts to zero the water level. Cover slides off and may be clipped over the base for standing the tool vertically during use. Tab enables hanging from suitable protrusion. Supplied with standard black tube.
Zinc plated hexagon steel spanner with comfortable, slightly offset handle.
Kit includes 12-15mm, 15-22mm & 22-28mm expander heads, expander tool, and carry case.
For joining two pieces of copper pipe of same diameter without using fittings. Resulting capillary joint can be soft or hard soldered. Loose socket former allows easier withdrawal of tool after use. Pipe wall thickness: 0.7mm (15mm) and 0.9mm (22mm).
Carbo-nitrided carbon steel cutting blades. Not suitable for removing stainless steel olives. 22mm will not fit 3/4" Imperial olives.
Pipe Deburring Brush
For cleaning the inside of copper fittings and socket formed joints on copper pipe prior to soldering. Stiff steel bristles.
Tap Re-Seater Tool
Heavy duty all steel construction. Re-cuts worn tap seats. Hardened cutters sizes 3/4" & 1" included.
Mini Tube Cutter
Handy mini tube cutter for 3-22mm copper tube. High speed steel cutting wheel & double rollers.
Quick Adjust Pipe Cutter
For cutting copper, brass, aluminium, polyethylene & other light gauge pipes. Diameter range: 6-50mm. 2 spare cutting wheels. Built in deburring tool.
Ratchet Motion Tube Cutter
Spring loaded self-adjusting cutting wheel cuts without having to make continuous adjustments.
PVC Pipe Cutter
ABS plastic pipe cutter. Die cast aluminium body & hardened steel blade. Ratchet & lever mechanism will cut pipe, conduit & plastic extrusions up to 42mm without crushing. Colour may vary.
Quick Action PVC Pipe Cutter
For ABS plastic, vinyl, PVC & polyethylene pipe and conduit. 26mm & 42mm (max) preset switch. Quick blade return button.
Flaring Tool Kit
Contains pipe clamp, 45 deg spreader & 7 dies 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
Deburrer
Tool for removing burrs from the ends of pipe. Hardened steel swivelling cutter head.
Mini Tube Bender
For 6, 8 & 10mm copper pipe. Strong aluminium casting & heavy duty hinge. Graduated up to 180.
Heavy Duty Pipe Bender
Heavy duty professional pipe bender for 15 & 22mm copper tube & 15mm stainless steel tube. Includes guides.
Thumbturn Pipe Wrench
- Self adjusting, laminated sheet metal construction
- Comfort grip handle
- Steel jaws
Wide Jaw Plumbing Pliers
Drop forged 5 position adjustment with toothed jaws for loosening and tightening round fittings on plastic waste pipes. Complete with pair of removable soft jaws.
Manhole Keys
Designed for easy removal of manhole covers. Made from a single piece of malleable iron with a tee handle and D shaped end.
Stop Cock Key
Strong steel stop cock key. 1000mm long. Fits most 1/2" & 3/4" square & crutch head stop cocks. Pointed handle for opening stop cock covers.
Adjustable Basin Wrench
Makes reaching bath tap nuts & basin tap nuts easy. Adjustable pivoting head with hardened steel jaws. 280mm long. Fits 1/2" & 3/4" nuts.
Steel handle with hexagonal end and removable tommy bar. Fits 15mm and 22mm (1/2" and 3/4") nuts.
3 piece set includes 2 double ended box spanners and a tommy bar.
Sizes: 9,11,12,13mm
Sizes: 9,11,12,13mm
Waste Pipe Cleaner
For clearing blocked waste pipes.
- 6mm diameter.
- Cork screw end & integrated handle.
Plunger
Metal Drain Testing Plug
Tough plastic central mandrel has inflatable replaceable collar secured by 2 clips. Central nipple for connection to U Gauge. Reverse end of plug has removable stopper for an air test. Replace stopper and use as a drain plug for blanking off pipes. Equipped with Schrader valve inflation hose. Maximum inflation pressure 12psi / 0.86 bar.
For use with all Monument air bags fitted with a Schrader Valve. Pump includes flexible adaptor.
Pipe Threading Kit
Suitable for threading black gas or galvanized iron pipes. Kit contains four die heads, two piece tubular steel handle and a compact ratchet head. Cast iron die heads with four alloy steel chasers per head for clean accurate thread cutting. Each die head has four swarf removal holes. Die sizes 1/2", 3/4", 1", and 1 1/4" BSP.
Digital Thermometer
Measures in both Celsius and Fahrenheit and features a temperature hold function. Measuring range -50C (-58F) to +125C (+257F).
To change the size of text on our website, use these keyboard-button combinations:
Smaller text press buttons Ctrl & -
Normal (best) text press buttons Ctrl & 0
Bigger text press buttons Ctrl & +
