Sizes 1/32, 1/16 and 3/32 with ribbed finish for easy handling.

Manufactured from high carbon steel. Suitable for cutting sheet steel, thickness 0-6mm.

300mm engineers file set 1pc flat file and 1pc half round file. Complete with heavy duty rubber grip handles.

Forged from high quality steel. Blades are induction hardened, tempered and machine ground to ensure a clean cut with no slip.Manufactured in Sheffield.

Traditional plumber’s tool - all purpose wrench and by means of the moveable bolt, grips the work piece tighter as more pressure is exerted. The hook incorporates a screwdriver type end. Made in Sheffield.

Hardened steel blades. Accurate on inside and outside edges. Manufactured to DIN 875/1.

Machined on base and one vertical side allowing a choice of mounting positions. Fine adjustment screw for quick, accurate height setting. Powerful two sided magnet with on/off switch.

Double ended hardened steel engineers scriber. Knurled & blacked grip.

These hinge joint calipers feature nut & quadrant quick adjustment & have fully hardened & ground points.

The legs of these callipers pivot on a roller & are tensioned with a bow spring. Adjustment is made using a quick adjust split nut. Fully hardened & ground points.

Professional quality reduction scale rule with metric divisions. Scale sizes 1:20, 1:25, 1:50, 1:75, 1:100 and 1:125.

Made from anodised aluminium. Metric and imperial scale.

Heat treated steel.

Precision made stainless steel rule. Featuring exceptionally clear markings achieved by photo etching. Graduations in metric & imperial. Satin finish reduces reflection.

High carbon steel vernier calliper resolution 0 - 150 x 0.02mm. Four way measurement internal, external, depth and stop.

Internal & external measuring tips. Stainless steel body. Metric & imperial. Thumb roll switch control. Depth measuring blade. Positive locking screw. Complete with case.

Enamelled frame & satin chrome thimble & sleeve. Supplied in a strong plastic box. Range 0 - 25mm. Resolution 0.01mm.

Precision micrometer with digital read-out metric & imperial settings. Supplied with case. Range 0-25mm. Resolution 0.001mm/0.00005.

Knurled handles and locking nuts, automatically self centering plungers with constant spring tension. Use for quick inside measurement of cylinders. Indirect measurement by outside micrometer. Set contains: 8 – 12.7, 12.7 – 19, 19 – 32, 32 – 54, 54 – 90 and 90 – 150mm.

High precision shockproof dial indicator with low measuring force & 10mm travel. Rotating bezel with lock for zero setting. Range 0 - 10mm, graduation 0.01mm.

Used to determine internal and external thread forms. Blades clearly marked with thread sizes from 0.4 - 6mm.

Sharpens mini/low profile domestic chainsaws without removing the chain from the saw. Kit includes metal file holder & round file for sharpening cutters. Depth gauge and flat file for maintaining depth guides at the correct height.

Double injection soft grip handle.

Double injection soft grip handle.

Double injection soft grip handle.200mm blade

Double injection soft grip handle.

Double injection soft grip handle.

Double injection soft grip handle.

3 piece 250mm Engineers file set. Includes flat, round & half round 2nd cut files. 2 colour soft grip handles.

4x 200mm (8”) files : round, tri-square, flat and half round. 12x 140mm needle files : flat parallel, half round, tri square, square, round, flat taper, knife, barrette, crossing, oval, joint round edge, feather edge. Comes with pouch.

10 piece set of assorted 140 x 3mm needle files.

6pce set of 100mm warding files all with impact resistant plastic handles.

10pce set of assorted 140x3mm diamond needle files.

8 piece parallel pin punch set. 200mm long. Includes 2.4, 3.2, 4, 4.8, 5.6, 6.4, 7.9 & 9.5mm punches.

5 piece centre punch set. Square heads, knurled grip & polished tips. Hardened & tempered.

6 x cold chisels, 3 x taper punch, 2 x centre punch. Supplied in pouch.

Manufactured from chrome vanadium. Contents are 13x90mm, 16x90mm, 19x110mm, 22x130mm and 25x110mm flat chisels. 6x110mm cape chisel, 3x110mm & 6x110mm taper punch. 5x86mm & 6x86mm pin punch, 3x110mm & 5x86mm centre punch and chisel holder.

Taps & dies M3x0.5, M3x0.6, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x0.75, M6x1.0, M7x1.0, M7x0.75, M8x1.0, M8x1.25, M10x1.25, M10x1.5, M12x1.5, M12x1.75, NPT. Long handle adjustable tap wrench & die handle, Screwdriver, 'T' handle wrench, Screw pitch gauge. Made from tungsten steel.

4,5,6 and 8mm taper taps and dies."T" type tap wrench and cast alloy die holder.

Knurled brass body. High grade steel tip and hardened point for instant marking. Length 125mm.

36 piece letter & number stamp set (26 letters & 0-9 numbers). Hardened & tempered. Wooden storage box. 5mm stamp face.