Cutter positions for normal rebating and for planing into corners. Adjustable fence can be used either side of the plane. Cuts rebates up to 38mm / 1 ½” wide. Supplied in a hinged storage case.

Malleable iron body. High carbon steel blade. Epoxy coated. Length 250mm.

Tungsten carbide. Includes tip guard and pocket clip.

For use on all types of wood, aluminium, copper, plastics & laminates. Comfortable rubberised handle can be set in two positions, to enable use as either a plane or a file. Manufactured from zinc alloy. Blade size 250X40mm. Includes spare blade.

Rosewood handles secured by 2 brass screws, milled sides, brass adjusting screw and heavy duty 2mm blade. Cast iron body.

For use with hard or soft woods.

The polypropylene handle provides control and comfort and though primarily designed for use with a mallet it will accept occasional use with a steel hammer. Sizes: 6, 12, 19, 25mm. Manufactured in Sheffield.

Shatter proof cellulose acetate handle, can be used with either a mallet or a steel hammer. The most popular all round chisel with the ability to perform dovetailing and cuts in tight corners. Sizes: 6, 12, 19, 25mm.Manufactured in Sheffield.

Restores a good cutting edge to straight or bevelled edged chisels and plane irons from 3mm to 67mm

Dowelling jig for producing E, L, & T joints with either 6, 8, or 10mm dowels in stock up to 30mm thick.

Clamping tape for parquet and laminate flooring.

MN 65 hardened steel quality. Plastic body.

MN 65 Hardened steel quality. Plastic body.

MN65 hardended steel quality. Plastic body.

Grey iron casting with all brass fittings offering screw depth control, lateral control and cam action locking lever cap. Adjustable mouth for coarse or fine work.

Beautifully finished No. 4 plane with rosewood handles, milled sides & adjusting screw. Heavy duty 2mm blade.

Speeds & simplifies door hanging. Marks & cuts sharp, clean profiles in doors & jambs for accurate hinge installation. Depth scriber marks correct depth for mortice.

Hot melt glue gun. Electronic temp. control. Includes 2 glue sticks, stand & fitted BS approved plug. CE approved. 240v.

Soft lead oval section pencils for wood & other building materials.

300mm hardened steel blade marked in metric. Heavy die cast stock with built-in spirit level & scriber.

Stainless steel blade marked in metric and imperial.

Made from heavy gauge steel and powder coated with white painted graduations. Measures up to 550mm. Adjustable 0-70° in both directions.

Cast aluminium stock with milled faces and brass screws. Metric and imperial markings. Built-in spirit level.

Barrel constructed from die cast aluminium, with precise factory aligned laser module marks. Angles from 0 to 90° in 1° increments. 0.05° accuracy.

As a guide rail can be clamped across boards to provide a firm straight edge. Used as a clamp can give light pressure when glueing multi panel boards.

High quality tungsten steel corner chisel held in a spring loaded steel bodied jig. Ideal for knocking out rounded corners from a routed hinge recess.

Bevel edged chisel fully forged from hardened and tempered chrome vanadium. Split proof polypropylene handles can be struck with a hammer or mallet.

Expert quality hardened steel bevel edged blades. Cushion grip 2 piece handle with steel striking cap. Supplied with blade guards.

Designed for joinery and light commercial work. Sharpened and ready for use. Solid one-piece forged blade ensures structural integrity. Cap for use with hammer. 6/10/13/19/25mm.

Chisel blade manufactured from high-grade specialist steel . Splitproof CAB handle guaranteed not to split under any circumstances . Solid one-piece forged blade ensures structural integrity . 1/4"-3/8"-1/2"-3/4"-1"-1.1/4".

Bevel edged chisels fully forged from hardened and tempered chrome vanadium. Split proof polypropylene handles can be struck with a hammer or mallet. Set includes 6, 13, 19, 25 and 32mm chisels.

Use to produce perfect screw joints every time. Pocket hole jig comes complete with 6, 8 & 10mm guides allowing the joint to be filled with a dowel.

Water cooled sharpener for chisels and blades. Blade capacity 10-60mm. Sharpening angles 25°, 30°, 35° , 40° for primary & secondary bevels, plus rebate chisels. Includes guides for sharpening knives and scissors and leather strop for razor-sharp edges. Powered by any power drill.

Chunky plastic handle with hardened steel 90° countersink. For wood & plastic.

Shaft with hardened chrome vanadium steel chisel blade. Colour may vary.

Centres and makes starter holes for screws. Simply use the hinge as a template.

Cuts all types of glass. Six cutting wheels on a turret with snap off vice.

Double pinion hand drill with good quality hard wood handles. Double pinion milled gears make for smoother running. Fitted with 6mm 3 jaw hand tight chuck.

Solid wooden head. 115mm face.

Hardwood body with knurled brass adjusting screw & single hardened marking spur.