Hand Tools > Carpenters Tools

Draper Plastic Mitre Box Catalogue p101 Catalogue 101 Draper Plastic Mitre Box >
Made from tough impact resistant recycled plastic. Two 45° and one 90° guide on both edges and two countersunk holes for fixing to workbench. One edge is deeper to facilitate easier cutting.
Draper Expert Clamping Mitre Box Catalogue p101 Catalogue 101 Draper Expert Clamping Mitre Box >
Two sprung clamps for holding work piece. 45°, 22.5° and 90° guides.

45°, 22.5° and 90° guides on the two edges with a side on 45° for larger sections of materials.
Two bench edge stops and 2 countersunk slots for permanent fixing to bench.
Bradawl Catalogue p123 Catalogue 123 Bradawl >
Shaft with hardened chrome vanadium steel chisel blade. Colour may vary.

Sale will be restricted to over 18s.
Hardwood Bradawl Catalogue p123 Catalogue 123 Hardwood Bradawl >
For use with hard or soft woods.

Sale will be restricted to over 18s.
Access Panel Catalogue p132 Catalogue 132 Access Panel >
Fits in walls, ceilings or units. Fully detachable door for unrestricted access. High impact polystyrene (HIPS). Can be painted.
Hand Countersink Catalogue p123 Catalogue 123 Hand Countersink >
Chunky plastic handle with hardened steel 90° countersink. For wood & plastic.
Tapered Reamer Catalogue p123 Catalogue 123 Tapered Reamer >
Carbon steel.
Will cover holes from 3-12mm.
Can be used to open holes to non-standard diameters.
Butt Marker Catalogue p123 Catalogue 123 Butt Marker >
Speeds & simplifies door hanging. Marks & cuts sharp, clean profiles in doors & jambs for accurate hinge installation. Depth scriber marks correct depth for mortice.
Hinge Screw Punch Catalogue p123 Catalogue 123 Hinge Screw Punch >
Centres and makes starter holes for screws. Simply use the hinge as a template.
Pocket Hole Jig Catalogue p59 Catalogue 59 Pocket Hole Jig >
Use to produce perfect screw joints every time. Pocket hole jig comes complete with 6, 8 & 10mm guides allowing the joint to be filled with a dowel.
Hand Drill Catalogue p123 Catalogue 123 Hand Drill >
Double pinion hand drill with good quality hard wood handles. Double pinion milled gears make for smoother running. Fitted with 6mm 3 jaw hand tight chuck.
Diamond File Set Catalogue p121 Catalogue 121 Diamond File Set >
Pack of 3 150 x 50mm diamond files. Coarse, fine and extra fine. Colour coded for easy identification. Use to sharpen all kinds of objects.
Marking Gauge Catalogue p123 Catalogue 123 Marking Gauge >
Made from beechwood with single hardened marking spur and plastic turn screw.
Mortice Gauge Catalogue p123 Catalogue 123 Mortice Gauge >
Made from beechwood with hardened spurs and brass slide.
Steel Framing Square Catalogue p123 Catalogue 123 Steel Framing Square >
Steel framing square ideal for marking out on large sheet materials.
Combination Square Catalogue p123 Catalogue 123 Combination Square >
300mm hardened steel blade marked in metric. Heavy die cast stock with built-in spirit level & scriber.
Super Angle Guide Catalogue p123 Catalogue 123 Super Angle Guide >
Made from heavy gauge steel and powder coated with white painted graduations. Measures up to 550mm. Adjustable 0° - 70° in both directions.
Roofing Square Catalogue p123 Catalogue 123 Roofing Square >
Cast aluminium with embossed metric and imperial graduations. Protractor scale 0-90°. Use as a saw guide for angle measurements and cuts.
Smoothing Plane Catalogue p121 Catalogue 121 Smoothing Plane >
Beautifully finished No. 4 plane with rosewood handles, milled sides & adjusting screw. Heavy duty 2mm blade.
Hand Plane Catalogue p121 Catalogue 121 Hand Plane >
Rosewood handles secured by 2 brass screws, milled sides, brass adjusting screw and heavy duty 2mm blade. Cast iron body.
Block Plane Catalogue p121 Catalogue 121 Block Plane >
Pressed steel body with a high carbon steel iron.
Draper Multi Rasp Planer Catalogue p121 Catalogue 121 Draper Multi Rasp Planer >
Diecast body with plastic handle. Supplied with replaceable high carbon steel blade.
Draper Honing Guide Catalogue p122 Catalogue 122 Draper Honing Guide >
Restores a good cutting edge to straight or bevelled edged chisels and plane irons from 3 to 67mm.
Dowelling Jig Catalogue p59 Catalogue 59 Dowelling Jig >
Dowelling jig for producing E, L, & T joints with either 6, 8, or 10mm dowels in stock up to 30mm thick.
Hot Melt Glue Gun Catalogue p124 Catalogue 124 Hot Melt Glue Gun >
Electronic temperature control. Includes 2 glue sticks and stand. CE approved. Replacement glue sticks 61606 .
Professional Glue Gun Catalogue p124 Catalogue 124 Professional Glue Gun >
Easy squeeze lever action for precise application. Solid state electronics. Check valve controls glue flow. Interchangeable non-drip nozzle. Heat flow system keeps handle cool. Safety stand. Replacement glue sticks 61606 .
Guide Clamp Catalogue p128 Catalogue 128 Guide Clamp >
As a guide rail can be clamped across boards to provide a firm straight edge. Used as a clamp can give light pressure when gluing multi panel boards.
Door & Board Lifter Catalogue p132 Catalogue 132 Door & Board Lifter >
Aluminium casting. Allows easy positioning of doors & plasterboard with one foot.
Oilstone & Box Catalogue p122 Catalogue 122 Oilstone & Box >
Combination silicone carbide sharpening stone. Fine & medium grades 200 x 50 x 25mm.
Glass Cutter Catalogue p125 Catalogue 125 Glass Cutter >
Cuts all types of glass. Six cutting wheels on a turret with snap off vice.
Pincers Catalogue p123 Catalogue 123 Pincers >
Drop forged carbon steel carpenters pincers.