2 metre white coaxial fly lead. Male to male plug.

For connection between PSU and the receiver (TV, VCR or Digibox), screened for interference reduction.

1.5 metre.

Gold plated terminals, includes locking feature to eliminate poor connections. Screened for interference reduction.

Standard signal splitter/combiner (1 in 2 out or 2 in 1 out), compatible with UHF/VHF.

Variable attenuator, for reducing signal level for UHF/VHF and DAB.

UHF/VHF and SAT compatible. 'F' connectors throughout. 5 - 2300 MHz with low insertion loss (2 way: <4.7 dB, 4 way: <9 dB). Isolation >20 dB. (Performance figures apply to UHF TV band).DC continuity between common input & 1 output port. Ideal for splitting arial feeds in strong signal areas or after amplification.These products cannot be used to split 1 satellite dish feed to multiple receiver locations; each satellite receiver requires a dedicated LNB line (2 for Sky+).

Cool-running power unit for all masthead preamplifiers.

• 47 - 826 MHz, insertion loss < 0.5 dB.
• 12 V regulated DC o/p at 100 mA max.
• Fully screened RF section.

General-purpose VHF-UHF 'set-back booster' amplifier. 1 Way:

• 88 - 862 MHz
• 12 dB gain
• 2.5 dB noise figure.
2 Way:
• 88 - 862 MHz
• 2 x 4 dB gain
• 3.5 dB noise figure.

Separate VHF/FM and UHF TV inputs. Input filter rejects TETRA. Line-power at UHF input to provide power to masthead pre-amplifier.

Versatile in-line remote-powered UHF preamplifier.

• 12 dB gain
• 'TETRA filtered' input
• Supplied as kit with power unit.

9V IR extender 'eye' power at all outputs. Very popular solution for providing Sky* or Sky+ extension to 4 or 8 remote rooms. Separately filtered VHF/FM and UHF TV inputs. Sharp cut-off UHF input filter gives rejection of TETRA airwaves.

Complete home distribution system. 5 or 10 outputs plus IR control over SKY. Separate UHF/FM/DAB and SAT inputs. Aux input for CCTV camera (via modulator). LNB 2 input for SKY+. Line power at UHF aerial input and IR control via all outputs.

Input filtering, attenuates Airwave TETRA signals. Robust fully screened amplifier modules – compliant with European EMC standards. 'F' connectors for reliable connection and high screening integrity.

Use to locate satellite signals.

Infrared receiver 'eye' for remote control of Sky® boxes.

• Compatible with proAMP-R & starBOX.
• 9 V 10 mA DC line-power requirement.
• Power from Sky® box or amplifier.

6” welded wall bracket. Includes ‘V’ bolts and fixings.

For use with 15mm boom type aerials, comes complete with ‘V’ bolt and nuts.

Pressed chimney bracket, includes lashing kit.

Complete mounting system with fixings and cable, suitable for UHF and VHF aerials.

Unique tile fixing method, used where height is required but no chimney or gable end wall available. Suitable for mounting CCTV cameras, security lighting and aerials.

Cranked: 3'x1”, 18g (914x25.4x1.2mm). Double bend alloy mast.Straight: 6'x1", 18g (1828x25.4x1.2mm). Alloy mast.

Entry level TV aerial kit. Suitable for strong signal areas. Supplied with mounting bracket and fixing kit.

Omni directional VHF FM aerial (88-108 MHz). Rugged construction with a watertight insulator cap. Includes a heavy-duty mast clamp, suitable for loft or exterior mounting.

3 element DAB digital radio aerial. Loft or outdoors mountable, includes printed circuit balun for superior reception.

Skirting board surface mount F type outlet box.

Standard twin flush mounting outlet plate, 1 x F type, 1 x IEC (coax plug) type.

Unscreened single 'IEC' outlet.

• DC-862 MHz, insertion loss < 0.5 dB.
• Clamp-type cable connection.
• No special tools required.
• Ideal for Freeview®.

Fully-screened dual independent 'F' outlets (separate cable connections).

• DC-2300 MHz, insertion loss <1.5 dB.
• Clamp-type cable connections.
• Ideal for Sky+®.

Fully-screened single 'F' outlet.

• DC-2300 MHz, insertion loss < 1.5 dB.
• Clamp-type cable connection.
• No special tools required.

Fully-screened triple outlets for FM, DAB, UHF TV & satellite

• Single cable input with triplexer.
• DC-pass to SAT for LNB power.
• Ideal for Sky® or Freeview® with radio.

Outlet plates for use with proAMP-R and starBOX products, and similar applications requiring a return signal feed to the distribution amplifier.

• Triplexed outlet for VHF, UHF & SAT
• 'IEC' return inlet for distribution feed
• Secondary UK telephone socket (LJU).

Outlet plates for use with proAMP-R and starBOX products, and similar applications requiring a return signal feed to the distribution amplifier.

• Triplexed outlet for VHF, UHF & SAT
• Second independent SAT outlet for Sky+®
• 'IEC' return inlet for distribution feed.
• Secondary UK telephone socket (LJU).

Fully-screened dual 'IEC' outlets for FM, DAB & TV.

• Single cable input with diplexer
• DC-pass to TV socket for IR 'eyes'
• Ideal for Freeview® with DAB & FM.